Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > MARKETPLACE > Commercial Sales
Register FAQ Members List Calendar Mark Forums Read

Commercial Sales For the Commercial sales of Firearms and Accessories. Read the rules before posting.

Reply
 
Thread Tools Display Modes
  #121  
Old 10-11-2021, 7:55 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: DEAD AIR KEY MOUNT FLASH HIDERS & MUZZLE BRAKES, FROM $69.95

DEAD AIR KEY MOUNT FLASH HIDER FOR AK M14x1LH, $69.95
https://www.robertrtg.com/store/pc/D...1LH-4p4766.htm


DEAD AIR KEY MOUNT FLASH HIDER FOR 5/8x24 RH, $69.95
https://www.robertrtg.com/store/pc/D...-RH-6p7351.htm


DEAD AIR KEY MOUNT MUZZLE BRAKE FOR 7.62MM, 5/8X24, $69.95
https://www.robertrtg.com/store/pc/D...X24-6p8881.htm


DEAD AIR MICRO KEY MOUNT BRAKE FOR 5/8x24 RH, $69.95
https://www.robertrtg.com/store/pc/D...-RH-6p7576.htm


DEAD AIR KEY MOUNT MUZZLE BRAKE FOR 1/2x28 RH, $69.95
https://www.robertrtg.com/store/pc/D...-RH-6p7646.htm


DEAD AIR MICRO KEY MOUNT BRAKE FOR 1/2x28 RH, $69.95
https://www.robertrtg.com/store/pc/D...-RH-6p7736.htm


DEAD AIR KEY MOUNT MUZZLE BRAKE 1/2X36 .38 BORE, $79.95
https://www.robertrtg.com/store/pc/D...ORE-6p8410.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #122  
Old 10-13-2021, 6:44 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FN MAGS, P90, FIVE-SEVEN, 503, 509, 509C, FNX, FNS, FNP...

[B]FN P90 5.7X28MM 50RD MAGAZINE, $38.95
https://www.robertrtg.com/store/pc/F...NE-14p4638.htm


[B]FN FIVE-SEVEN MAGAZINE 5.7 X 28MM, 20RD, $34.95
https://www.robertrtg.com/store/pc/F...RD-14p4687.htm


FN 503 9MM 8RD MAGAZINE NEW, BLACK, $34.95
https://www.robertrtg.com/store/pc/F...K-405p8921.htm


FN 509 9MM 17RD MAGAZINE, $41.95
https://www.robertrtg.com/store/pc/F...EW-14p8159.htm


FN 509 9MM 24RD MAGAZINE, $54.95
https://www.robertrtg.com/store/pc/F...EW-14p7943.htm


FN 509 LS EDGE 9MM 17RD MAGAZINE, $68.95
https://www.robertrtg.com/store/pc/F...EW-14p8665.htm


FN 509C 9MM 12RD MAGAZINE, BLACK, PINKY EXTENSION, $43.95
https://www.robertrtg.com/store/pc/F...ON-14p8295.htm


FN 509C 9MM 12RD MAGAZINE NEW, FDE, PINKY EXTENSION, $43.95
https://www.robertrtg.com/store/pc/F...N-405p8919.htm


FN 509C 9MM 15RD MAGAZINE, BLACK, $41.95
https://www.robertrtg.com/store/pc/F...CK-14p8158.htm


FN 509C 9MM 15RD MAGAZINE, FDE, $41.95
https://www.robertrtg.com/store/pc/F...DE-14p8157.htm


FN 509M 9MM 15RD MAGAZINE NEW, BLACK, $41.95
https://www.robertrtg.com/store/pc/F...K-405p8920.htm


FN FNS 9MM 12RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7851.htm


FN FNS 9MM 17RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p8023.htm


FN FNS/FNX .40SW 14RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7822.htm


FN FNX 9MM 17RD MAGAZINE, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7821.htm


FN FNX .45ACP 15RD MAGAZINE, BLACK, $43.95
https://www.robertrtg.com/store/pc/F...EW-14p7877.htm


FN FNX .45ACP 15RD MAGAZINE NEW, STAINLESS W/BLACK BASEPLATE, $43.95
https://www.robertrtg.com/store/pc/F...W-405p7960.htm


FN FNP .45ACP 15RD MAGAZINE NEW, STAINLESS W/BLACK BASEPLATE, $43.95
https://www.robertrtg.com/store/pc/F...W-405p8702.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #123  
Old 10-14-2021, 7:28 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: MP5 3-LUG QUICK DETACH FLASH HIDER NEW, $139.95

MP5 style 3-lug, quick detach, flash hider for your MP5, SP5, MP5K, SP5K or MP5K-RS. Will work on any 3-lug barrel.

Well built and beautiful. Made with pride by GSL Technologies in Jackson Michigan, USA. Counts as one 922r compliance part.

Installs quickly onto your 3-lug barrel. Just push on and twist clockwise to lock. Push down and twist counterclockwise to remove.

MP5 3-LUG QUICK DETACH FLASH HIDER NEW, $139.95
https://www.robertrtg.com/store/pc/M...W-107p8927.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #124  
Old 10-15-2021, 6:59 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: PMAG 10/30 10RD AR/M4 GEN M3 5.56x45 MAGAZINE, $16.95

Magpul Industries, PMAG, .223/556NATO, Designed For Users Who Reside in Areas With Magazine Capacity Restrictions But Desire a Standard 30-round Magazine Form, 10 Rounds, Black

Ten round capacity PMAG in a 30-Round Magazine body
Proprietary lock plate reduces maximum capacity to 10-rounds while maintaining a standard 30-round size
Aluminum rivet permanently secures the lock plate with the lock plate tab being clearly marked for capacity
Next-generation impact and crush-resistant polymer construction
Constant-curve geometry and a long-life stainless-steel spring ensure smooth feeding.

Magpul's PMAG 10/30 was designed for users who reside in areas with magazine capacity restrictions but desire a standard 30-round magazine form. The PMAG 10/30 provides the same next-gen impact and crush resistance, constant curve geometry, and long-life stainless-steel spring to ensure smooth feeding. They've added a proprietary lock plate that reduces the maximum capacity to 10 rounds, and it's permanently secured by an aluminum rivet. A lock plate tab that's clearly marked for capacity is also included.

PMAG 10/30 10RD AR/M4 GEN M3 5.56x45 MAGAZINE, $16.95
https://www.robertrtg.com/store/pc/P...INE-6p8948.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #125  
Old 10-19-2021, 7:28 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: EXCELLENT PPS-43 KITS, MAGS, MAG COMBO...



Excellent PPS43 Parts kits are now available. Nicest demills we have seen for a long time. See website for full details:

PPS-43 PARTS KIT $129.95
https://www.robertrtg.com/store/pc/P...IT-15p8173.htm


PPS-43 35RD MAGAZINE $14.95
https://www.robertrtg.com/store/pc/P...NE-14p3787.htm


PPS-43 3-MAGAZINES AND POUCH COMBO, $44.99
https://www.robertrtg.com/store/pc/P...BO-14p3362.htm


PPSH-41 PPS-43 COMBO TOOL $3.95
https://www.robertrtg.com/store/pc/P...L-236p8174.htm


Thanks for looking and happy shooting!
RTG Parts
931 Frank St.
Sheridan, WY 82801
Phone: 307-675-1191
Email: darwin@rtgparts.com
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #126  
Old 10-20-2021, 7:08 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: MAGPUL XTM HAND STOP KIT FOR PICATINNY, ALL COLORS, $18.95

Magpul Industries, XTM Hand Stop Kit, Fits Picatinny Rail, Kit Includes One Hand Stop, One Index Panel, One Full XTM Enhanced Panel, And One XTM Enhanced Half Panel, Olive Drab Green (ODG)

TSP texture for enhanced weapon control
Lightweight low-profile
Prevents the shooter's hand from reaching the muzzle

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel. Made in U.S.A.

MAGPUL XTM HAND STOP KIT FOR 1913 PICATINNY, BLACK, $18.95
https://www.robertrtg.com/store/pc/M...ACK-8p8962.htm


MAGPUL XTM HAND STOP KIT FOR 1913 PICATINNY, GRAY, $18.95
https://www.robertrtg.com/store/pc/M...RAY-8p8963.htm


MAGPUL XTM HAND STOP KIT FOR 1913 PICATINNY, FDE, $18.95
https://www.robertrtg.com/store/pc/M...FDE-8p8964.htm


MAGPUL XTM HAND STOP KIT FOR 1913 PICATINNY, OD GREEN, $18.95
https://www.robertrtg.com/store/pc/M...EEN-8p8965.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #127  
Old 10-21-2021, 7:07 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: MAGPUL XTM ENHANCED RAIL PANELS FOR PICATINNY, $7.55

4-PACK of two rail covers. Magpul Industries, XTM Enhanced Rail Panel, Fits Picatinny Rail, 4 Two Piece Panels, Polymer Construction, Black

Low-profile, two-piece covers
Attach anywhere on a 1913 Picatinny rail
Panels feature an aggressive anti-slip texture
(4) two-piece panels

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail. Made in U.S.A.

MAGPUL XTM ENHANCED RAIL PANEL KIT FOR 1913 PICATINNY, BLACK, $7.55
https://www.robertrtg.com/store/pc/M...ACK-8p8966.htm


MAGPUL XTM ENHANCED RAIL PANEL KIT FOR 1913 PICATINNY, GRAY, $7.55
https://www.robertrtg.com/store/pc/M...RAY-8p8967.htm


MAGPUL XTM ENHANCED RAIL PANEL KIT FOR 1913 PICATINNY, FDE, $7.55
https://www.robertrtg.com/store/pc/M...FDE-8p8968.htm


MAGPUL XTM ENHANCED RAIL PANEL KIT FOR 1913 PICATINNY, OD GREEN, $7.55
https://www.robertrtg.com/store/pc/M...ODG-8p8969.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #128  
Old 10-22-2021, 7:39 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: WALTHER PPK/S .22LR 10RD MAGAZINE NEW, $37.95

Factory original Walther PPK/S /22LR 10rd Magazine. What a fun little pistol. Stock up on these quality German made magazines while they are available.

WALTHER PPK/S .22LR 10RD MAGAZINE NEW, $37.95
https://www.robertrtg.com/store/pc/W...EW-14p8152.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #129  
Old 10-25-2021, 7:40 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: 20-PACK GERMAN MARKET ACU AK47 30RD MAGS, UNDER $5 EACH, $99

I know we posted this not too long ago, but I wanted to leave it up for the weekend. These are flying off the shelves so get yours while we have some left.

We have a super deal on AC-Unity German-Market AK47 30rd Magazines. These mags were made for sales in Germany. Due to new European Union and German weapon laws these mags are no long legal for the public to purchase or own. We have imported all remaining stock at a blowout price. There loss is your gain!

Zoom in on the hi-res images to see the exact markings.

Twenty magazines for under one hundred dollars. That's less than five dollars each. You won't see a deal like this again on top quality AK magazines. Stock up while you can, this is a one time deal. When they are gone, they are gone forever.

20-PACK GERMAN MARKET AC-UNITY AK47 30RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/store/pc/2...ACH-4p8950.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #130  
Old 10-26-2021, 7:34 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HK33 PARTS KIT W/ FLAT & RCM CHF BARREL, $1099.00

HK33 parts kit with receiver flat, weldment kit and RCM cold hammer forged barrel.

Kit includes:
RCM Cold Hammer Forged 16.1" HK33 Barrel. Best quality barrel every made in the USA!
Our HK33 Receiver Flat with weldment kit. All weldments are new, including HK contract rear sight base with lightning cuts
Surplus Plastic stock set including SEF Style Contoured Lower, A2 Fixed Buttstock and Wide Handguard with Bipod Groove.
US Parts: Semi-Auto Sear Spring with Bushing, Ejector Lever, Barrel and Receiver Flat
German Parts: Bolt Group, Trunnion, Cocking Tube, Trigger Pack, Sights, Flash Hider, Push Pins, Barrel Pin, Eye loop, Mag Catch Set with Anti Rattle Paddle and 40rd Magazine

These are great kits for building a nice HK33/93 clone. There are some inconsistencies from kit to kit. For example some of the anti-rattle paddles are on a receiver stub, others are loose. Some parts are pre-assembled into assemblies, some kits are all loose.

Functional Good condition of surplus parts. Expect finish wear.

These are the nicest 33 kits that have been available for a long time. Include the best HK style 5.56mm barrel ever made in the USA.

Only a few sets available.

HK33 PARTS KIT W/ FLAT & RCM CHF BARREL, $1099.00
https://www.robertrtg.com/store/pc/H...L-106p8983.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #131  
Old 10-27-2021, 7:13 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FRANKLIN ARMORY BFSIII BINARY TRIGGER PACK - HK, $629.99

If you want one, get it now. The BFSIII for HK is a 3-Position Trigger. In position 3 it will fire 1 round on Pull and 1 round on Release. This makes it the fastest semi-automatic trigger on the market.

FRANKLIN ARMORY BFSIII BINARY TRIGGER PACK FOR HK, $629.99
https://www.robertrtg.com/store/pc/F...-HK-2p6941.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #132  
Old 10-28-2021, 6:55 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: FRANKLIN ARMORY BFSIII AK-C1 BINARY TRIGGER FOR AK, 449.99

The Binary Firing System GEN 3 (BFSIII) is a 3-position trigger. In position three it fires one round on pull and one round on release, making it the fastest semi-automatic trigger on the market. This trigger is ideal for both tactical and competition use. The BFSIII provides significantly reduced split times between rounds, allowing for tighter groups.

Trigger Operation:

Position 1 – Safe –Will not fire
Position 2 – Semi – Fires 1 round per pull
Position 3 – Binary – Fires 1 round on pull and 1 round on release

FEATURES:

Release round can be canceled by simply moving our Patent Pending selector out of Binary mode while holding the trigger back
Easy to install
Positive reset on release phase
Great for competition shooters, tactical shooters, and recreational enthusiasts

FRANKLIN ARMORY BFSIII AK-C1 BINARY TRIGGER KIT FOR AK, 449.99
https://www.robertrtg.com/store/pc/F...-AK-5p6984.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #133  
Old 10-29-2021, 6:48 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: DSHK 51RD BELT WITH TAB - RUSSIAN, $54.95



SIG ROMEO3 RED DOT REFLEX SIGHT WITH RISER, $399.99
https://www.robertrtg.com/store/pc/S...SER-8p8070.htm

JMAC CUSTOMS RSA-MP5 M1913 PICATINNY BACK PLATE, $80.96
https://www.robertrtg.com/store/pc/R...S-106p7313.htm

JMAC CUSTOMS RSA-MP5K M1913 PICATINNY BACK PLATE, $80.96
https://www.robertrtg.com/store/pc/M...S-107p6926.htm

PCS MP5K HANDGUARD, $39.99
https://www.robertrtg.com/store/pc/S...S-107p8507.htm

AC-UNITY MP5 30RD 9MM MAGAZINE, $22.95
https://www.robertrtg.com/store/pc/M...Y-129p7021.htm

AC-UNITY MP5 40RD 9MM MAGAZINE, $24.95
https://www.robertrtg.com/store/pc/M...Y-129p7022.htm

MI HK MP5K HANDGUARD, M-LOK, $104.95
https://www.robertrtg.com/store/pc/M...K-107p5994.htm

LSC MP5 RECEIVER FLAT, $199.99
https://www.robertrtg.com/store/pc/L...T-107p2306.htm

These and more at: www.RobertRTG.com
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #134  
Old 11-01-2021, 8:32 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: AC-UNITY AK 7.62x39 MAGAZINES, FROM UNDER $5



20-PACK GERMAN MARKET AC AK47 30RD MAGS, UNDER $5 EACH
https://www.robertrtg.com/store/pc/2...ACH-4p8950.htm

AC-UNITY AK47 30RD 7.62x39 MAGAZINE, SOVIET STYLE FOLLOWER, $7.95
https://www.robertrtg.com/store/pc/A...Y-164p7758.htm

AC-UNITY AK47 40RD 7.62x39 MAGAZINE, SOVIET STYLE FOLLOWER, $8.95
https://www.robertrtg.com/store/pc/A...Y-164p7759.htm

AC-UNITY AK47 30RD 7.62x39 BHO MAGAZINE, $8.95
https://www.robertrtg.com/store/pc/A...Y-164p7007.htm

AC-UNITY AK47 40RD 7.62x39 BHO MAGAZINE, $9.95
https://www.robertrtg.com/store/pc/A...Y-164p7009.htm

AC-UNITY AK47 30RD 7.62x39 GEN1 WINDOW BHO MAGAZINE, $9.95
https://www.robertrtg.com/store/pc/A...Y-164p7010.htm

AC-UNITY AK47 40RD 7.62x39 GEN1 WINDOW BHO MAGAZINE, $9.95
https://www.robertrtg.com/store/pc/A...Y-164p7011.htm

AC-UNITY AK47 30RD 7.62x39 GEN2 WINDOW MAGAZINE, W/ 2-FOLLOWERS, $13.95
https://www.robertrtg.com/store/pc/A...E-164p8170.htm

AC-UNITY AK47 40RD 7.62x39 GEN2 WINDOW MAGAZINE, W/ 2-FOLLOWERS, $14.95
https://www.robertrtg.com/store/pc/A...E-164p8171.htm

JMAC CUSTOMS AB-8 1913 FOLDING STOCK, $283.37
https://www.robertrtg.com/store/pc/J...K-106p8814.htm

These and more at: www.RobertRTG.com
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #135  
Old 11-02-2021, 7:34 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: JMAC 1913 PICATINNY FOLDING STOCKS AND TAILHOOK ADAPTERS...

JMAC CUSTOMS AB-8 1913 FOLDING BRACE ADAPTER, $240.26
https://www.robertrtg.com/store/pc/J...M-106p7393.htm


JMAC CUSTOMS AB-8R 1913 FOLDING BRACE ADAPTER, $240.26
https://www.robertrtg.com/store/pc/J...R-106p8816.htm


JMAC CUSTOMS AB-8 1913 FOLDING STOCK, $283.37
https://www.robertrtg.com/store/pc/J...K-106p8814.htm


JMAC CUSTOMS AB-8R 1913 FOLDING STOCK, $283.37
https://www.robertrtg.com/store/pc/J...K-106p8800.htm


JMAC CUSTOMS SS-8 1913 FOLDING STOCK, $253.71
https://www.robertrtg.com/store/pc/J...K-106p8817.htm


JMAC CUSTOMS SS-8R 1913 FOLDING STOCK, $258.21
https://www.robertrtg.com/store/pc/J...K-106p8818.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #136  
Old 11-03-2021, 6:45 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HK USP COMPACT PICATINNY FLASHLIGHT AND LASER MOUNT, $44.95

There is little doubt that the HK USP handgun is one of the ten best handguns manufactured. Unfortunately, HK chose to manufacture the dust cover integral mounting rail to only accept specific flashlights. With the large number of flashlights and lasers that fit on a Picattiny or MIL-STD-1913 rail, GG&G has designed and manufactured an HK USP full size flashlight mounting rail adapter meeting the Picatinny Rail specifications.

SPECIFICATIONS:
Easily installed.
Picatinny (MIL-STD-1913) dovetail rail mount for lights prepared to mount on this style of dovetail.
Fits Streamlight TLR-1, TLR-2, TLR-7, TLR-8 and Surefire X300.
Fits tightly to the USP trigger guard allowing for the rear rocker switches to be activated by the fire control finger or thumb of the off hand.
Three piece, lightweight mount easily clamps onto the existing USP light rails.
The rail fits tight enough to retain zero on laser sights.
Materials: Manufactured from solid billet 6061-T6 aircraft grade aluminum.
Finish: Type III hard coat anodized matte black per Mil-Spec.
Weight: Full Size: .70 oz.
Compact: .65 oz.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans.

GG&G HK USP COMPACT PICATINNY RAIL FLASHLIGHT AND LASER MOUNT, $44.95
https://www.robertrtg.com/store/pc/G...UNT-8p8991.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #137  
Old 11-04-2021, 6:57 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: GG&G HK USP FULL SIZE 1913 FLASHLIGHT/LASER MOUNT, $44.95

There is little doubt that the HK USP handgun is one of the ten best handguns manufactured. Unfortunately, HK chose to manufacture the dust cover integral mounting rail to only accept specific flashlights. With the large number of flashlights and lasers that fit on a Picattiny or MIL-STD-1913 rail, GG&G has designed and manufactured an HK USP full size flashlight mounting rail adapter meeting the Picatinny Rail specifications.

GG&G HK USP FULL SIZE PICATINNY RAIL FLASHLIGHT AND LASER MOUNT, $44.95
https://www.robertrtg.com/store/pc/G...UNT-8p9008.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #138  
Old 11-05-2021, 7:36 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: BENELLI M4 FRONT & REAR QD SLING ATTACHMENTS W/ LIGHT MOUNT

The Benelli M4 is not just a shop favorite, but a personal favorite as well. There is very little I would change on such a perfect platform, however, mounting solutions for slings and flashlights do leave a little room for improvement, and here it is!

GG&G BENELLI M4 SHOTGUN QUICK DETACH SLING AND FLASHLIGHT MOUNT, $39.60
https://www.robertrtg.com/store/pc/G...NT-15p8993.htm


GG&G BENELLI M4 QUICK DETACH REAR SLING ATTACHMENT, $27.75
https://www.robertrtg.com/store/pc/G...NT-15p9007.htm


GG&G BENELLI M1 M2 M3 M4 STAINLESS STEEL FOLLOWER, $27.95
https://www.robertrtg.com/store/pc/G...ER-15p7356.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #139  
Old 11-08-2021, 8:21 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: RUGER MINI-14 SIDE SCOPE MOUNT, $109.99

The series 182 Ruger Mini-14 rifle has remained a very popular rifle with hunters, outdoorsmen and women, and for home defense. Adding a scope mount and magnified scope or red dot sight is a great addition to your Mini-14. The GG&G Mini-14 Side Mounted Scope Mount provides a solid and rugged mounting base for your optic.

SPECIFICATIONS:
Fits Mini-14 series 182 and newer Non RANCH RIFLE models.
Easy installation.
No gunsmithing or modification needed to your Ruger Mini-14.
Bolts to the side of the receiver with a new replacement bolt stop cover plate.
The mounting rail is adjustable allowing for alignment with barrel and receiver.
Includes the all important extended bolt hold open button.
Features a dual locking screw leveling system.
Package includes all necessary mounting hardware and tools.
Mounting rail is manufactured to MIL-STD-1913 specifications.
Mounting rail is 5 ¼" long.
The Mini-14 Scope Mount is designed as a "See –Under" type allowing use of iron sights.
All edges have been deburred and softened to protect the shooter.
Material: Precision CNC machined from 6061 T6 Aircraft Grade Aluminum.
Finish: All aluminum parts are Type III hard coat anodized in a non-reflective matte black mil-spec finish to provide outstanding durability.
Weight: 3.5oz.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans!

RUGER MINI-14 SIDE SCOPE MOUNT, $109.99
https://www.robertrtg.com/store/pc/G...NT-15p9031.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #140  
Old 11-09-2021, 8:57 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: M1A SCOUT SCOPE MOUNT, $94.95 The GG&G M1A Scout Scope Mount is perfect for set

In order to meet the many EOTech protective hood configurations, provide easy installation and keep the price point competitive, we decided to offer our patented lens covers with a new enhanced 6061 T6 aluminum hood in a lens cover combo package for the EOTech EXPS holographic scopes. For those of you that want to keep the battery retention wire set up, we have pre-drilled the hood in the same location as the original, and have included a new battery cap retention wire and figure 8 wire clamps for your use.

This GG&G EOTech EXPS Hood And Lens Cover Combo will fit EOTech models EXPS2-0 & EXPS2-2.

IMPORTANT: The EXPS Hood & Lens Cover Combo Will Not Fit the XPS Series of scopes.

SPECIFICATIONS:

Installs easily with provided tool.
No alteration needed to the EOTech EXPS Scope.
Aids in protecting the optic's lenses.
Spring loaded EOTech lens covers are easily operated.
Front lens cover opens to serve as a sun shade.
Front lens cover can be folded to lie on top of folded rear cover.
Rear lens cover folds flat on top of the protective hood.
Ambidextrous activation tabs on front and rear cover offer tactical flexibility.
Because of the contours of the EOTech body, these rifle scope lens covers are not 100% waterproof, but they do prevent most dust, debris, rain and snow from accumulating on the lenses.
Material: The EOTech EXPS Scope protective hood is manufactured from Aircraft Grade 6061-T6 Aluminum.
Finish: The protective hood is Type III hard coat anodized in a non-reflective black Mil-Spec finish to provide combat durability.
All of the windage and elevation calibration markings on the GG&G hood are fully engraved and present an off-white appearance to make it easier for the end user to reference.
Weight: Less than 3.0 oz.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans!

EOTECH EXPS 2-0 & 2-2 HOOD/LENS COVER COMBO, $53.99
https://www.robertrtg.com/store/pc/G...MBO-8p9036.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #141  
Old 11-10-2021, 7:24 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: M1A SCOUT SCOPE MOUNT, $94.95

The GG&G M1A Scout Scope Mount is perfect for setting up your rifle with a red dot scope or long eye relief magnified scope. It easily installs in the cut out of the upper factory handguard. We cut a large channel in the rail so that the iron sights could be used with the scope in place. Check out all of the specifications below.

SPECIFICATIONS:

The overall design provides smooth integrated appearance.
Specifically designed for the M1A "Scout Squad” or "SOCOM 16", with cutout factory top handguard.
DOES NOT FIT Standard M1A, NM or non-Springfield Armory models.
Easy installation.
Low profile design.
No modifications to your weapon are required.
Center channel reduces weight and allows for the use of the factory iron sights.
Clamps to the barrel for maximum stability and accuracy with 8 clamping screws vs. the factory 6 screws.
Provides 7 inches of MIL-STD 1913 "Picatinny” rail.
Extends rearward to the front of the receiver for mounting "Scout" style scopes.
All edges are smoothed and rounded for the shooters safety.
Material: CNC Machined from tough but light weight 6061-T6 billet aluminum.
Finish: Type III hard coat anodized non-reflective matte black per Mil-Spec.
Weight: The GG&G M1A Scout Scope Mount weighs 6.8oz. The factory mount that is being replaced weighs 3.3oz. Net increase: 3.5oz.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans!

GG&G M1A SCOUT SCOPE MOUNT, $94.95
https://www.robertrtg.com/store/pc/G...NT-15p9044.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #142  
Old 11-11-2021, 7:08 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: M1A SOCOM II ACCUCAM QD SCOPE MOUNT W/ 30MM RINGS, $194.99

The SOCOM II M1A Rifle is a compact, powerful close quarter combat battle rifle. However its "Cluster Rail" system makes it difficult to mount a conventional low powered scope. You have to install an additional receiver mounted scope base to the SOCOM II along with a set of scope rings that are tall enough so that the objective lens clears the top rail. If you want Quick Detach capability, you need to mount your scope on top of the receiver mounted scope base with some type of QD mount and ring combo. We think that's a PIA and has too many interface points that could negatively affect the zero retention of your scope. The New Products Team at GG&G has come up with an innovative solution---The SOCOM II Accucam Quick Detach Scope Mount With 30mm Integral Rings.

SPECIFICATIONS:

The overall design provides smooth integrated appearance.
The Accucam Quick Detach System provides quick and easy on-off transitions while maintaining 1/2 MOA accuracy.
Accucam QD System is fully adjustable to fit worn or out of spec dovetails.
The SOCOM II Accucam Quick Detach Scope Mount has dual recoil lugs that interface with the recoil slots of the top dovetail rail to provide secure recoil resistance.
The scope has 30mm integral rings with four cap screws per ring. Each cap screw threads into stainless steel helicoils.
2.5" measurement inside ring face to inside ring face allows for forward/rearward adjustment of different eye relief scopes.
1.260" from top of the SOCOM II "Cluster Rail" to center of 30mm integral rings, provides lower scope mounting while still clearing the objective lens of most scopes up to 50mm.
The cantilever feature of the SOCOM II Scope Base overhangs 3" to allow for additional forward/rearward adjustment for scopes with different eye reliefs.
The underside of the SOCOM II QD Scope Mount is relief cut for unimpeded cartridge ejection.
The main body is manufactured from solid billet 6061-T 6 aluminum Type III hard anodized in a non-reflective combat finish per Mil-Spec.
All steel components of the Accucam Quick Detach System are manufactured from 4140 ordnance steel and manganese phosphate in a non-reflective combat finish per Mil-Spec.
Length: 6"
Lightweight skeletonized construction -- 7.7 oz.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans!

GG&G M1A SOCOM II ACCUCAM QUICK DETACH SCOPE MOUNT WITH 30MM INTEGRAL RINGS, $194.99
https://www.robertrtg.com/store/pc/G...GS-15p9037.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #143  
Old 11-12-2021, 8:37 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: VP9 MAGAZINES & VP9 MAGAZINE CONVERSION KIT (15RD-17RD)

HK VP9SK P30SK 9MM 10RD EXTENDED BASEPLATE MAGAZINE NEW, $37.95
https://www.robertrtg.com/store/pc/H...EW-12p6776.htm


HK VP9 P30 9MM 17RD MAGAZINE NEW, $38.95
https://www.robertrtg.com/store/pc/H...EW-12p7123.htm


HK VP9SK P30SK 9MM 13RD MAGAZINE NEW, $38.95
https://www.robertrtg.com/store/pc/H...EW-12p6767.htm


HK VP9SK P30SK 9MM 15RD MAGAZINE NEW, $38.95
https://www.robertrtg.com/store/pc/H...EW-12p6771.htm


HK VP9 P30 9MM 20RD MAGAZINE NEW, $47.95
https://www.robertrtg.com/store/pc/H...EW-12p6762.htm


HK VP9 P30 9MM 17RD MAGAZINE CONVERSION KIT FOR 15RD MAGS, $14.95
https://www.robertrtg.com/store/pc/H...GS-12p8681.htm


ETS HK VP9 P30 9MM 17RD MAGAZINE NEW, $16.95
https://www.robertrtg.com/store/pc/E...EW-12p8027.htm


ETS HK VP9 P30 9MM 21RD MAGAZINE NEW, $17.95
https://www.robertrtg.com/store/pc/E...EW-12p8034.htm


ETS HK VP9 P30 9MM 30RD MAGAZINE NEW, $18.95
https://www.robertrtg.com/store/pc/E...EW-12p7083.htm


PROMAG VP9 9MM 17RD MAGAZINE NEW, $17.95
https://www.robertrtg.com/store/pc/P...EW-12p6869.htm


PROMAG HK VP9 9MM 32RD MAGAZINE, $29.95
https://www.robertrtg.com/store/pc/P...NE-12p6744.htm


HK VP9SK CLEANING & REPAIR MAT BY TEKMAT, $10.49
https://www.robertrtg.com/store/pc/H...MAT-7p6769.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #144  
Old 11-15-2021, 6:53 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: 20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH

We have a super deal on AC-Unity German-Market AK47 40rd Magazines. These mags were made for sales in Germany. Due to new European Union and German weapon laws these mags are no long legal for the public to purchase or own. We have imported all remaining stock at a blowout price. There loss is your gain!

Functionally speaking these mags are identical to ACU-02. Cosmetically there are a couple small differences:

Zoom in on the hi-res images to see the exact markings.

Twenty magazines for under one hundred dollars. That's less than five dollars each. This is an unbeatable deal on top quality AK magazines. Stock up while you can. When they are gone, they are gone forever.

20-PACK GERMAN MARKET AC-UNITY AK47 40RD MAGS, UNDER $5 EACH, $99.00
https://www.robertrtg.com/store/pc/2...ACH-4p9054.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #145  
Old 11-16-2021, 6:46 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: CIRCLE 10 AK EXTENDED CHARGING HANDLE, STD & ZHUKOV, $24.95

Get a better grip with the CRH Customs Extended Charging Handle for AKs. Made with 1018 steel, these charging handles are 35 mm in length and weighs 53 grams.

Easy to install. requires no permanent modifications.

Made by CRH Customs (formerly Circle 10 AK) who has provided the American firearms community with 20 years of exceptional quality and reliability. Every CRH Customs part is designed, developed, tested and manufactured right here in the USA.

AK EXTENDED CHARGING HANDLE, CRH CUSTOMS / CIRCLE 10 AK, $24.95
https://www.robertrtg.com/store/pc/A...-AK-4p8315.htm


AK EXTENDED CHARGING HANDLE FOR ZHUKOV FOLDERS, CRH CUSTOMS / CIRCLE 10 AK, $24.95
https://www.robertrtg.com/store/pc/A...-AK-4p8316.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #146  
Old 11-17-2021, 6:59 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: ALG DEFENSE AK TRIGGER ENHANCED, AKT-EL, $114.95

The ALG AK Trigger Enhanced with Lightning Bow (AKT-EL) is a single stage trigger designed for the AK47 and AK74 variant platforms. The AKT-EL features a smoother and shorter trigger pull than the stock trigger and is ideal for combat and home defense use. It is machined from gun quality alloy steel and has a corrosion resistant Manganese Phosphate finish.

The AKT-EL features the Lightning Bow, which produces a very comfortable feel to the user over the stock trigger, while enhancing trigger control. For OEMs and builders, the AKT-EL lends three parts towards 922(r) Compliance.

ALG DEFENSE AK TRIGGER ENHANCED, AKT-EL, $114.95
https://www.robertrtg.com/store/pc/A...-EL-4p4345.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #147  
Old 11-18-2021, 7:22 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: AK47/AKM & YUGO M70 KEYMOD HANDGUARDS...

AK47 AKM SHORT KEYMOD HANDGUARD, $58.35
https://www.robertrtg.com/store/pc/A...ARD-4p6603.htm


AK47 AKM MEDIUM KEYMOD HANDGUARD, $69.75
https://www.robertrtg.com/store/pc/A...ARD-4p6604.htm


AK47 AKM LONG KEYMOD HANDGUARD, $82.75
https://www.robertrtg.com/store/pc/A...ARD-4p6605.htm


YUGO M70 AK47 KEYMOD HANDGUARD, $58.35
https://www.robertrtg.com/store/pc/Y...ARD-4p4612.htm
[IMG]https://www.robertrtg.com/store/pc/catalog/a[/QUOTE]
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #148  
Old 11-19-2021, 6:41 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: HK USP .40 16RD EXPERT MAGAZINE NEW, GERMAN, $49.95

German HK USP .40 16rd magazine. These are made to work with HK USP Jet-Funnels however they fit and function perfect in all HK USP .40 full size pistols. Without the Jet-Funnel, they will extend past the grip.

ORIGINAL HK, MADE IN GERMANY

CONDITION: NEW

HK PART NUMBER 215116

HK USP .40 16RD EXPERT MAGAZINE NEW, GERMAN, $49.95
https://www.robertrtg.com/store/pc/H...AN-12p6022.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #149  
Old 11-22-2021, 6:54 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SUREFIRE WARCOMP FLASH HIDER FOR AK, THREADED 14x1, $179.00

The revolutionary SureFire WARCOMP-762-AK47 flash hider is the world's most shootable flash hider. Fits 7.62mm weapons with 14x1 muzzle threads. Its patented design provides three valuable functions:

It provides over 99% reduction in muzzle flash compared to a plain muzzle, which helps to conceal the shooter's location and preserve his dark-adapted vision.

It virtually eliminates muzzle rise, which enhances monitoring of target reaction and staying on target for faster follow-up shots.

It serves as a rock-solid mounting adapter for all SureFire SOCOM Series 7.62mm Fast-Attach suppressors, including our SOCOM556-RC model, which placed first in the most extensive and rigorous suppressor testing ever conducted by US Special Operations Command.

SUREFIRE WARCOMP FLASH HIDER FOR AK47, THREADED 14x1, $179.00
https://www.robertrtg.com/store/pc/S...4x1-4p9073.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #150  
Old 11-23-2021, 6:45 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: BENELLI M1 & M2 +3 MAGAZINE TUBE EXTENSIONS, $79.95

The GG&G Benelli M1 & M2 Magazine Extension is easy to install as long as you have a working knowledge of how to break down your shotgun to perform maintenance procedures. No modification to the shotgun is required. These three shot Magazine Extensions use the factory follower or you can purchase a GG&G Benelli Enhanced High Visibility Follower (GGG-1509) for it as well. Also available are GG&G Benelli M1 Barrel Clamps (GGG-1871) & GG&G Benelli M2 Barrel Clamps (GGG-1812).

GG&G BENELLI M1 +3 MAGAZINE TUBE EXTENSION, $79.95
https://www.robertrtg.com/store/pc/G...ON-15p9041.htm


GG&G BENELLI M1 +3 MAGAZINE TUBE EXTENSION, $79.95
https://www.robertrtg.com/store/pc/G...ON-15p9040.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #151  
Old 11-24-2021, 7:22 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SIG ROMEO1 PRO RED DOT 1X30 6MOA REFLEX SIGHT, BLACK & FDE..

Sig Sauer, Romeo1 Pro, Reflex Sight, 6 MOA Dot, 1 MOA Adjustments

This is the same model Red Dot that Sig installs onto factory Red Dot Slides!

Advanced electronic technologies
Military-inspired designs
Maximum clarity, accuracy and performance

The ROMEO1PRO brings a new level of durability and performance to the miniature open-reflex red dot sight. Its aircraft grade aluminum housing ensures corrosion resistance under the harshest environments, and a new upgraded point-source emitter provides increased brightness in day or night conditions with 12 brightness settings. The molded glass aspheric lens has upgraded high performance coatings for superior light transmittance and zero distortion giving you fast, responsive target acquisition and accuracy. The ROMEO1PRO includes a ruggedized protective shroud in the box for extreme durability.

SIG ROMEO1 PRO RED DOT 1X30 6MOA REFLEX SIGHT, BLACK, $399.99
https://www.robertrtg.com/store/pc/S...GHT-8p9016.htm


SIG ROMEO1 PRO RED DOT 1X30 6MOA REFLEX SIGHT, BLACK, $419.99
https://www.robertrtg.com/store/pc/S...FDE-8p9055.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #152  
Old 11-29-2021, 6:52 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SCAR FORWARD ACCESSORY RAIL W/ QD, $43.45

GG&G had the privilege to be involved with the FNH SCAR family of rifles early on when SOCOM was testing it for adoption. When FNH decided to release the SCAR to the retail public we knew it would be well received. We have designed and manufactured a few Tactical Accessories that enhance the SCAR and your shooting experience.

The SCAR Forward Accessory Rail is one of those accessories. The Forward Accessory Rail allows the shooter additional mounting space for accessories forward of the standard forearm. This not only allows the shooter to utilize different hand positions, but also provides room for an integral QD Sling Swivel socket.

SPECIFICATIONS:

Will fit SCAR models: MK16, MK17, MK16S and MK17S.
SCAR Forward Accessory Rail is 6 1/16" long to provide additional rail space for lights or lasers.
Extends approximately 2" forward of original factory accessory rail.
Manufactured to MIL-STD-1913 specifications.
The integral Quick Detach sling attachment is located far enough forward so the sling does not interfere with the reciprocating charging handle.
Can be installed on either side to accommodate both right and left handed shooters.
The QD swivel socket has limited rotation built in to prevent sling wrap-up.
All corners have been rounded to protect the shooter.
Maintains FN's original spring-lock barrel mounting system.
Rail weighs 2.4 oz
Manufactured from tough 6061-T6 billet aluminum and Type III hard coat anodized matte black per MIL-SPEC.
Warranty: Lifetime.
Made In America By Men And Women Proud To Be Americans!

GG&G SCAR FORWARD ACCESSORY RAIL W/ QD, $43.45
https://www.robertrtg.com/store/pc/G...AIL-8p9039.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #153  
Old 11-30-2021, 6:44 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SIG P320 THREADED BARRELS, 1/2X28, 4.3" & 4.6"

Factory SIG Sauer OEM Threaded Barrel for your P320C 9mm. 4.3" & 4.6" in length and threaded 1/2x28. Best quality available and straight from SIG.

SIG P320SC 4.3" 9MM THREADED BARREL, 1/2X28
https://www.robertrtg.com/store/pc/S...8-216p9058.htm


SIG P320SC 4.6" 9MM THREADED BARREL, 1/2X28
https://www.robertrtg.com/store/pc/S...8-216p9057.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #154  
Old 12-01-2021, 6:41 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SIG P320 M17 5.5" 9MM THREADED BARREL, 1/2X28, $172.95

Sig Sauer, Barrel, 9MM, 5.5", Black, Threaded 1/2X28, Fits Sig P320C or M17

Factory SIG Sauer OEM Threaded Barrel for your P320 9mm. 5.5" in length and threaded 1/2x28. Best quality available and straight from SIG.

Whether you shoot suppressed now or may want to in the future, this is a great addition to your P320. Factory correct OEM barrels are not always availabl

SIG P320 M17 5.5" 9MM THREADED BARREL, 1/2X28, $172.95
https://www.robertrtg.com/store/pc/S...8-216p9059.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #155  
Old 12-02-2021, 6:44 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: PM-63 RAK PARTS KIT WITH 25RD MAGAZINE, $199.95

PM-63 RAK parts kit complete less barrel. Includes demilled receiver and 1 25rd magazine. No barrel is included.

We put a kit together for display. Sourced a demilled barrel elsewhere to complete the look. It holds itself together good enough to hang on the wall. Can also be made into a semi auto with the correct semi components and a fresh barrel.

PM-63 RAK PARTS KIT WITH 25RD MAGAZINE, $199.95
https://www.robertrtg.com/store/pc/P...NE-15p8828.htm


PM-63 RAK SMG HOLSTER, $19.95
https://www.robertrtg.com/store/pc/P...TER-8p3033.htm


PM-63 RAK SMG SLING NEW, $6.95
https://www.robertrtg.com/store/pc/P...NEW-8p3404.htm


PM-63 RAK GRIP, $7.95
https://www.robertrtg.com/store/pc/P...IP-15p3293.htm


PM-63 RAK MULTI TOOL, $4.95
https://www.robertrtg.com/store/pc/P...OOL-7p3939.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #156  
Old 12-03-2021, 7:09 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: CIRCLE 10 AK 5-CELL CHEST RIG, COYOTE BROWN, $129.95

This is the best quality and most thought out chest rig I have ever seen. Holds all AK and AR 30rd and 40rd mags. The 40rd Ak47 mags stick out quite a bit but still secure perfectly!

The CRH Customs 5 Cell Chest Rig with Adjustable Bungee Cord Magazine Retention is made from high-strength fabric for serious usage. Developed after experiencing shortcomings of other chest rigs in various AK training courses, this chest rig carries up to 5 magazines (1 per cell), allowing the user a lower profile while in the prone firing position. Magazine retention is in the form of adjustable bungee cords with tabs for a secure retention but ease-of-use for quick reloads.

Rather than using a traditional H-Harness, this chest rig features a harness made from shock cord, allowing the user to fine-tune fitment to their body type. The chest rig also features a large hook & loop fastener for a secure attachment to compatible plate carriers. The center cell features a hook & loop fastener on the outside to allow users to place morale patches. Just behind the magazine cells is a pouch to store your map or other paperwork.

Due to the adjustable bungee cord magazine retention, this rig is compatible with AK magazines up to RPK74 magazines, including AR15 magazines up to Magpul 40 round PMAGs.

CRH CUSTOMS / CIRCLE 10 AK 5-CELL CHEST RIG, COYOTE BROWN, $129.95
https://www.robertrtg.com/store/pc/A...-AK-5p9061.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #157  
Old 12-06-2021, 7:15 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: CIRCLE 10 AK CHEEK RISER - TRIANGLE STOCK, 3 COLORS, $14.95

The CRH Customs cheek riser is made specifically for our full sized triangle stocks. It features a soft foam padding under a nylon strap to provide the shooter with the ability to have a higher cheek weld on their rifle as well as additional comfort.

Great way to optimize your cheek weld for use with red dots or other optics.

Made by CRH Customs (formerly Circle 10 AK) who has provided the American firearms community with 20 years of exceptional quality and reliability. Every CRH Customs part is designed, developed, tested and manufactured right here in the USA.

CRH Customs is expanding into several new weapons platforms so keep your eyes open for exciting new products which are coming soon.

CIRCLE 10 AK / CRH CUSTOMS CHEEK RISER FOR TRIANGLE STOCKS, MULTICAM, $14.95
https://www.robertrtg.com/store/pc/C...-AK-4p9062.htm


CIRCLE 10 AK / CRH CUSTOMS CHEEK RISER FOR TRIANGLE STOCKS, COYOTE, $14.95
https://www.robertrtg.com/store/pc/C...-AK-4p9063.htm


CIRCLE 10 AK / CRH CUSTOMS CHEEK RISER FOR TRIANGLE STOCKS, BLACK, $14.95
https://www.robertrtg.com/store/pc/C...-AK-4p9064.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #158  
Old 12-07-2021, 7:04 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: WALTHER P1 SLIDE NEW IN WRAP, $29.95

Walther P1 slide, new in wrap. Genuine German Walther production made for the German Army. This is an unissued part and will have no serial number stamping.

These 1980's production slides are the last generation produced. They are the most improved design and made from the strongest steel. This is the best P1 replacement slide you can find.

WALTHER P1 SLIDE NEW IN WRAP, $29.95
https://www.robertrtg.com/store/pc/W...WRAP-23p69.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #159  
Old 12-08-2021, 7:25 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: CHOATE HK33 HK53 MP5 PISTOL END CAP W/ SLING LOOP & BUFFER..

New Choate end cap for all single pin HK33 and MP5 style weapons. Fits: hk93, HK53, HK33, HK94, MP5, MP5SD. This Choate end cap is the strongest, best quality available and comes complete with sling swivel and H buffer. All Choate parts are U.S. made. Perfect for your pistol build or temporary end cap while waiting for your SBR paperwork.

AND

New Choate replacement H buffer. This is the correct buffer for all Choate MP5 and MP5K stocks and end caps.

CHOATE HK33 HK53 MP5 HK94 PISTOL END CAP W/ SLING LOOP, $33.95
https://www.robertrtg.com/store/pc/H...E-106p2211.htm


CHOATE H BUFFER NEW, $3.95
https://www.robertrtg.com/store/pc/C...W-106p2344.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
  #160  
Old 12-09-2021, 8:52 AM
RTGparts RTGparts is offline
Vendor/Retailer
 
Join Date: Apr 2021
Location: Sheridan, WY
Posts: 1,014
iTrader: 0 / 0%
Default WTS: SIG OPTICS, ROMEO 1, 3, 5, 8, MSR, MAGNIFIER COMBO...

SIG ROMEO8 RED DOT SIGHT, BALLISTIC CIRCLE DOT, 65MOA & 2MOA, TITANIUM PROTECTIVE SHROUD, $599.99
https://www.robertrtg.com/store/pc/S...OUD-8p8891.htm


SIG ROMEO1 PRO RED DOT 1x30 6MOA REFLEX SIGHT, FDE, $419.99
https://www.robertrtg.com/store/pc/S...FDE-8p9055.htm


SIG ROMEO1 PRO RED DOT 1x30 6MOA REFLEX SIGHT, $399.99
https://www.robertrtg.com/store/pc/S...GHT-8p9016.htm


SIG ROMEO3 RED DOT 1x25 3MOA REFLEX SIGHT, WITH RISER, $399.99
https://www.robertrtg.com/store/pc/S...SER-8p8070.htm


SIG ROMEO5X RED DOT 1x20 2MOA FOR PICATINNY, $179.99
https://www.robertrtg.com/store/pc/S...NNY-8p7992.htm


SIG ROMEO-MSR WITH JULIET3 MICRO MAGNIFIER COMBO KIT, $279.99
https://www.robertrtg.com/store/pc/S...KIT-8p8167.htm


SIG ROMEO-MSR COMPACT 1X20MM GREEN DOT, ON SALE, $103.95
https://www.robertrtg.com/store/pc/S...ALE-8p8795.htm


SIG ROMEO-MSR COMPACT 1X20MM RED DOT, ON SALE, $99.95
https://www.robertrtg.com/store/pc/S...ALE-8p7482.htm
__________________
Best Regards,
Brayton
RTG Parts
www.rtgparts.com
brayton@rtgparts.com
Calguns personal account: dnercesian
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 10:43 AM.




Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2021, Calguns.net an Incorporated Company All Rights Reserved.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.



Seams2SewBySusy