![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Centerfire Rifles - Semiautomatic or Gas Operated Centerfire rifles, carbines and other gas operated rifles. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Ya would have been done, but when I mounted my 80% rohg arms lower on the.CNC the machinest informed that tolerances were way off and he didn't want to take my money. I am so pissed, I have been working on this build for 6 months and Saturday was the day of completion. What would you do?
__________________
"If you ain't hurt you ain't tryin" |
#2
|
||||
|
||||
![]()
Contact Rohg Arms and exchange it?
__________________
"If the American people ever allow private banks to control the issue of their currency, first by inflation, then by deflation, the banks & corporations that will grow up around them will deprive the people of all property until their children wake up homeless on the continent their Fathers conquered. The issuing power should be taken from the banks and restored to the people, to whom it properly belongs." KrisAnne Hall on Oregon "I am sullied - no more" Col. Ted Westhusing |
#3
|
||||
|
||||
![]()
Buy a new lower. Try to contact Rohg see of you can exchange it si ce the 80 didn't get you touched
__________________
"get that evil thing out of the house" FFLs/Store I support and recommend: Don at Straightline Tactical in Anaheim Steve at OC Firearms in Fountain Valley. |
#7
|
||||
|
||||
![]()
My guess, he should have said "saving" rather then "working"
|
#10
|
||||
|
||||
![]()
I cut my first 2 80% lowers today! Good times!
Installed all the parts except tube, fit seems pretty good. Will test fire one tomorrow. Screw that wrinkled hag!
__________________
Yes I took the pic, no I didn't go swimming! |
#12
|
||||
|
||||
![]()
after all the bad reviews rohg arms has got, im surprised people still go to them, sorry that you are +1 victim of rohg, hope you have better luck getting them to fix it
__________________
-Sang ![]() |
#14
|
||||
|
||||
![]()
Yeah, I had one of those lowers. I managed to get it functional, but I had to use (read: destroy) a bullet button in the process. And I had to file a bit off of the upper to get it to fit. I would never use one of their products again. EVER. Where did you take it to finish it, btw? You don't have a location in you profile.
-Mb
__________________
|
#16
|
||||
|
||||
![]()
If so, you have to give Gabe credit for stepping up. I was there on Friday morning with two lowers, he checked them over well before going in the CNC.
|
#17
|
|||
|
|||
![]()
The two times I've been there, Gabe had to tell someone that their lowers were out of tolerance. The man certainly knows his poop. Now I wish he'd start milling 10/22's and 1911's!
|
![]() |
Thread Tools | |
Display Modes | |
|
|
![]() |
![]() |
![]() |