What did you reload today?

[G38xOC]

180 of 300 blk

Hor 150FMJ
CCI SRP
Converted Brass Mixed
15.5 of H110

[Red9]

A few 9s

Sent from my LG-D801 using Tapatalk

[pyogolf]

18 rounds of 6.5x55

[roostersgt]

After I get caught up loading for my hungry .308, Ill be enjoying only prepping and loading a box at a time. My OCD had me buy hundreds of brass cases for each rifle anyone I know owns, after getting started in reloading.

[Kaiserkase]

Does anybody reload 50 ae. I don't reload but I do need some 50ae

[halon101]

The Devils Post Pile?

Sitting in a hotel room sizing 38spl cases. Lee hand press.

[ironhorse1]

Today 25-20 with a cast 85 grain bullet and five grains of unique.

Also .32 Winchester Special with a cast, gas checked, 145 grain bullet from Western bullets and ten grains of Unique.

irh

[NapalmCheese]

Originally Posted by halon101

Sitting in a hotel room sizing 38spl cases. Lee hand press.

Hah, that was my Frebruary...

Sitting in a hotel room using a lee hand press to reload a bunch of .30 Missouri Bullet Company 165 RNFP over varying amounts of Red Dot in .30-30 cases.

[MrGreatshot]

Loaded some 10mm 155gr XTP's over 9.8gr's of 800X WLP 1.260 OAL
I hope they work good in the G40

[bigdawg86]

Haven't started yet... But just added 338 lapua to my list. Gotta pull the reloads that came with the rifle and then get started on ladder tests with Virgin lapua brass, 300 grain bergers, and retumbo

Sent from my SM-G900V using Tapatalk

[wbunning]

I did 150 9mm xtreme's, and 50 .44 cal that I hand-cast for .44 special. The 9mm are loaded at 1.105 over 4.1gr Titegroup. The .44 are at 1.48" over 7gr Unique. I also hand made a part ( the handle ) to convert my Hornady LNL powder measure to a stand alone unit to serve as my .223 powder measure. I had problems with the Horny, and went to a Lee unit with their micrometer measure and powder-thru to use on my LNL AP press.

[Archon_g24]

200 rounds of 38 special using 4.3gr of hp38 behind 158gr extreme 158gr plated swc.

[windrunner]

I prep'd 100 rounds of match .308. I had to replace my scale, so I have to delay finishing the cartridges until the new one arrives.

[pennstater]

Not a DAMN thing, as I had to replace my A/C-heater system in my house!
Crap! Next weekend back to loading after racing. I do NOT ever want to tackle that again. Tough work.

[hambam105]

For a second there I thought the OP asked, 'Why did you reload today'.

[FresnoRob]

Few days late .45 ACP 230G RN

[balmo]

Developing some 9mm major loads

1.150 COL
124 JHP Precision Delta
Win small rifle primers
Win Autocomp, from 6.6 to 7.2gr @ 0.2 increments

[rdfact]

Originally Posted by FresnoRob

Few days late .45 ACP 230G RN

What the heck you got going on there ?!? More info on your setup please.

[NorCalFocus]

I spent last week working on 300 .233 rounds.

Decaped
Light clean
FL sized
Cleaned again to remove lube
Swaged, flash hole uniformed, and primer pockets cleaned
Trimmed and chamfered

25.5g of BL-C(2)
WSR Primer
55g Hornady soft point

[FresnoRob]

Originally Posted by rdfact

What the heck you got going on there ?!? More info on your setup please.

A Dillon 1050 plus this: http://www.markvii-loading.com/ They have a 650 version either ready or close to being ready for sale.

[phoenixx858]

250 rounds 45 LC

[kengotit]

200 rounds of 9mm
100 rounds of 308 semi
50 rounds of 308 bolt
50 rounds of 6.5cm bolt
20 rounds of 6.5 cm ladder test

Last few days

[Camaro67]

Originally Posted by Kaiserkase

Does anybody reload 50 ae. I don't reload but I do need some 50ae

I bought a bunch to make into the Barrett 416 How many. Not gonna lose my shirt but can sell it for cost


Sent from my iPhone using Tapatalk

[00Medic]

Originally Posted by balmo

Developing some 9mm major loads

1.150 COL
124 JHP Precision Delta
Win small rifle primers
Win Autocomp, from 6.6 to 7.2gr @ 0.2 increments

Have you tried these out yet? Please share results. I was just looking into doing the same this morning.

[balmo]

00Medic, 7.0 and 7.2 is pretty much the ceiling on my Open barrel at close to 1500fps, not good. I got it dialed to 6.5gr and it is running at 1380fps. I really thought 7.0gr wasy load; as I've seen countless times on the net. Chrono is really reqired dialing 9major loads.

Anywho, I did 200 rds of 9major tonight:
Precision Delta 124gr JHP
6.5gr Win Autocomp
Win Small Rifle primers
1.155 COL

Also did 250rds 9minor
4.3gr Bullseye
Xtreme 124gr PL RN
Win Small Pistol primer
1.128 COL

[Rwnielsen]

I got a new barrel on my RPR so.... I took apart 160 rds. of fireformed handloads to resize. I'll have to start all over on load development. All in all, I really don't mind

[HKMadness]

Loaded up about 75 rounds of .357 magnum

158 grain sierra jhc
13.8 grains of 2400 powder
Cci spp
Coal 1.570 at cannelure with roll crimp
50 in new starline brass. The rest in once fired starline.

Gonna try out in my 686 4" and if all is well (should be) will load some more.

[aklon]

I just finished putting away the residual stuff from last night's session which saw 405 new .45 Long Colt loaded with Speer 260 grain semi-jacketed hollow point bullets on top of WW primer, nickel Star Line cases, and 12.9 grs. of Blue Dot.

A favorite for my S&W Model 25.

[Vita Brevis]

100 of my favorite .44 Mag plinking rounds. 9.8gr of Unique driving a 240gr Xtreme RNFP.

[Tradhunt]

Loaded up 100 rounds of 223 and 300 blackout the other night. Will load up a couple hundred more of each tonight.

Waiting for a case feeder and toolhead for the xl650 so I can setup for sizing 223 and converting them to 300 blackout.

Then need to order up some conversion kits for 9mm, 40, 10mm and maybe 45.

[bigdawg86]

Finished up loading 1k of 223... Just need to crimp them

Sent from my SM-G900V using Tapatalk

[Mr Wizard]

Loaded 150 rds of .223 using silver state M-193, 55 gr FMJBT over 25.2 gr of H335. CCI #41 primers.
Also loaded another 200 rd of 55 gr FMJBT using 26.1 gr of BL-C2 with CCI #450 magnum primers.

I went out to the SSZS to test them yesterday but the 20 mph wind gusts played havoc with my targets. Surprising to me was the H335 shot a lot flatter in the wind at 250 yards than the BL-C did. This was the first time I used H335.

[Capybara]

Originally Posted by FresnoRob

A Dillon 1050 plus this: http://www.markvii-loading.com/ They have a 650 version either ready or close to being ready for sale.

I checked that out. Pretty sweet setup. How do you like it? Worth the money?

[donnrcp]

31 gr TAC. Will chrono. They are so.....

leadless


Sent from my iPhone using Tapatalk

[wpod]

Prepped one hundred .223 cases.
Cleaned, inspected, deprimed/sized, inspected, cleaned primer cups, inspected, trimmed/chamfered, inspected.
Once all 500ish are done I'll load 'em up.

Sent from my SM-N910V using Tapatalk

[Tradhunt]

Loaded up some 300wsm and 300 blackout hunting rounds for testing a couple days ago.

Last night I loaded up another 300 rounds of 223 and 300 blackout plinking ammo.

[Dzrtrngr4x4]

Loaded 25 rounds of 300blk using 110 grain V-Max, with 19-19.8 W296 and 30 rounds with 150 grain FMJBT with 15-16 grains W296 for testing

Also loaded another 100 rd of 55 grain FMJBT using 25 grains of H335 with CCI #41 primers.

[jandmtv]

Not loading but close enough.

I took 200 pieces of new Lapua 260Rem brass and trimmed them to 1.915" on a Hornady camlock trimmer with power adapter.

Then used a Lyman debur and inside chamfor tool to clean the mouths of the cases.

Used K&M flash hole deburing tool to uniform and flare the flash holes.

Uniformed all primer pockets using the K&M primer pocket carbide uniformer.

Tumbled for 4 hours to polish and clean cases.



I still need to FL size down to 6.5 Creedmoor, expand the necks, neck turn, anneal, neck size, final trim on a Trim-It II trimmer and tumble.


Converting cases from one caliber to another is a major PITA. But to have fully accurized Lapua 6.5 Creedmoor brass is worth it!

[Tradhunt]

Originally Posted by Dzrtrngr4x4

Loaded 25 rounds of 300blk using 110 grain V-Max, with 19-19.8 W296 and 30 rounds with 150 grain FMJBT with 15-16 grains W296 for testing

Also loaded another 100 rd of 55 grain FMJBT using 25 grains of H335 with CCI #41 primers.

That's pretty close to what my loads have been for 300blk. But I have been using h110. Should give you some good results with the 150s. I'm using Barnes tac-tx 110grn but loading those for my ruger ranch.

I just loaded some 110s and 147s with lil gun to try out.

223 I'm running 55grn fmj with 24.8grn of 335

[Dzrtrngr4x4]

Took the 300blk out a couple weeks ago to break it in. Might load up some 175 SMK's also before I take it back out. I also have a pound of 4227 to try out.