#1
|
||||
|
||||
Pin and Weld
Are there any gunsmiths in the Sacramento area who do Pin and Welds on AR barrels?
Thanks -Tim
__________________
Politics is the art of looking for trouble, finding it everywhere, diagnosing it incorrectly and applying the wrong remedies.-Groucho Marx |
#2
|
||||
|
||||
Try MTG Firearms in Elk Grove.
As for Bob. Address: 9174 Franklin Blvd B, Elk Grove, CA 95758 Phone: (916) 525-5229
__________________
"People say nothing is impossible, but I do nothing every day.” "Nothing is foolproof to a sufficiently-talented fool." "The things that come to those who wait may well be the things left by those who got there first." |
#3
|
||||
|
||||
Try MTG Firearms in Elk Grove. They just established a gunsmith operation with some talented folks.
As for Bob. Address: 9174 Franklin Blvd B, Elk Grove, CA 95758 Phone: (916) 525-5229
__________________
"People say nothing is impossible, but I do nothing every day.” "Nothing is foolproof to a sufficiently-talented fool." "The things that come to those who wait may well be the things left by those who got there first." |
#4
|
|||
|
|||
Any competent welder can do it. Drill small hole thru muzzlebrake into threads of barrel .80 drop small piece of weld rod into it and neatly plug wld with tig. Just do not be foolish and take entire ar to him only the upper.I drilled a 3/32" hole and cut off a little piece of 6 penny nail.
|
Thread Tools | |
Display Modes | |
|
|