|
Commercial Sales For the Commercial sales of Firearms and Accessories. Read the rules before posting. |
|
Thread Tools | Display Modes |
#321
|
||||
|
||||
One tool will work for both .308 and .223 and comes with one blade in whatever caliber you order. The extra blade is not included, but is available for $4.99. I made the tool dimensions the same but could not make one blade work for both. However, the 6.8 and the .223 bolts have the same radius so the .223 blade works on both the .223 and the 6.8. I have another Calgunner testing the .308 to see if it will work on the 7.62 x 39. Once I get an answer about that I will post it up here too. It is not as confusing as it sounds. If you have both .223 and .308 you will need one tool and both blades. Changing the blades is easy. There are just two set screws to loosen and the blades come right out.
__________________
Greg |
#346
|
||||
|
||||
Just ordered (#797)... can't wait.
__________________
Laws and common sense is all up to interpretation to us humans... and guess what? Humans suck. Onegtalon... toooooo many hobbies man !... HDF, CGN/CGF member |
#353
|
||||
|
||||
They sent me the tool with both scrapers(.223/.308). The first time I used it, I had gone through 1000rds of DIRTY freaking ammo. When I bought the thing, I had ZERO clue how the thing worked, and wasn't any clearer about it when I looked at the tool. Thankfully the included directions are written for Morons like me, as I didn't even have to use my thinking cap to figure it out. I inserted the bolt into the hole, and the scraper literally went to town. These guys seriously know their math. The scraper is as close as it can get to the bolt without touching it, and immediately carves away all the carbon. You CANNOT force the blade into the bolt no matter how hard you try either. I checked..
The polishing side finishes the bolt up nicely, and you're good to go. The whole process is VERY quick. Both sides do their job lickity-split. Seriously a VERY well made piece. Not only does the job, but it's made to last a very long time. Exceeded my expectations. Last edited by fastkevin; 07-19-2012 at 12:23 PM.. |
Thread Tools | |
Display Modes | |
|
|