AR pistol pic thread

[Olav]

Does anyone know if Roger's Relics will DROS AR pistols?

[technique]

Originally Posted by Olav

Does anyone know if Roger's Relics will DROS AR pistols?

Yes, as far as I know. Give em a call.

[fonionrings]

Originally Posted by COBRA MASTER

Nice rail and saddle. Pof usa?

Yep.

[skyungjae]

Anyone know if the CAA saddle will fit on the tube without the foam?

[ghost]

Originally Posted by Olav

Does anyone know if Roger's Relics will DROS AR pistols?

last time i was there lisa told me that she wouldnt dros ar,ak,or mac type pistols.i guess it was too evil for her taste and comfort level.

[Olav]

Originally Posted by ghost

last time i was there lisa told me that she wouldnt dros ar,ak,or mac type pistols.i guess it was too evil for her taste and comfort level.

Thanks!

[fonionrings]

Originally Posted by skyungjae

Anyone know if the CAA saddle will fit on the tube without the foam?

For mine, it's already loose even sitting on the foam cover. I use zip-ties to keep it tight, and be aware that this does draw the sides lower, pretty much ruining it as an effective device for good cheekweld. But that's ok: it looks cool! And we all know that's the only thing that counts >=]

[Flopper]

Originally Posted by Olav

Does anyone know if Roger's Relics will DROS AR pistols?

Roger's Relics is a great FFL to deal with, but as has already been answered, they unfortunately won't DROS those pistols.

But this member in Fremont will:

http://www.calguns.net/calgunforum/s...d.php?t=228762

Of the few FFL's in the South Bay that will DROS AR & AK pistols, he is the cheapest I have found.

[hoppin62]

Here's mine.. just picked it up yesterday!

[COBRA MASTER]

Nice, what type of rail cover is that? Knights armament?

[hoppin62]

Originally Posted by COBRA MASTER

Nice, what type of rail cover is that? Knights armament?

Midwest rail, also has a Young BCG!

[Midian]

Ok. What's it cost to put a nice one together? I'm swooning.

[Peter W Bush]

Originally Posted by CalGuns

what you guys think about this built? should I get a handguard or leave it the way it is...

You should have got a handguard

[evollep3]

Originally Posted by Peter W Bush

You should have got a handguard

if im correct it should be now "you" should get a rail?

[CFV]

Originally Posted by evollep3

if im correct it should be now "you" should get a rail?

Was gonna jump on that upper, but wasn't sure if that gas block was going fit under a carbine quad rail...doesn't look like a standard block/barrel fit

[CFV]

Originally Posted by evollep3

if im correct it should be now "you" should get a rail?

Was gonna jump on that upper, but wasn't sure if that gas block was going fit under a carbine quad rail...doesn't look like a standard block/barrel fit

Show us pics once ya dress up that upper

[Peter W Bush]

Originally Posted by evollep3

if im correct it should be now "you" should get a rail?

Originally Posted by CFV

Was gonna jump on that upper, but wasn't sure if that gas block was going fit under a carbine quad rail...doesn't look like a standard block/barrel fit

Show us pics once ya dress up that upper

Im either trimming down the gas block or buying a low profile one. The only thing im not 100% sure about is which rail to buy that will fit that thing.

I'll post pics when shes finished

[Sinestr]

Originally Posted by hoppin62

Here's mine.. just picked it up yesterday!

Very nice build. I'm getting the itch very bad, I may have to start scratching.

[nowhere]

Why did I wander into this post

I hate this site, i hate the people in here, you all have ugly builds


sorry guys, just trying to talk myself out of building another one.

beautiful builds everyone

[pacrimguru]

Originally Posted by nowhere

Why did I wander into this post

I hate this site, i hate the people in here, you all have ugly builds


sorry guys, just trying to talk myself out of building another one.

beautiful builds everyone

do it! do it! i know you want to!

[evollep3]

Originally Posted by pacrimguru

do it! do it! i know you want to!

jerry do you store your guns upside down?

[hoppin62]

Originally Posted by nowhere

Why did I wander into this post

I hate this site, i hate the people in here, you all have ugly builds


sorry guys, just trying to talk myself out of building another one.

beautiful builds everyone

Don't do it!! I just bought this AR pistol and now a AK pistol and now I can't eat!!!

[CalGuns]

my newly built ar pistol...

[pacrimguru]

Originally Posted by evollep3

jerry do you store your guns upside down?

sometimes i do, i kinda alternate them. one up, one down, and so on. you can fit more in your safe that way.

[tacticalcity]

These things are so much fun...but I can't tell you how much I wish we could slip a stock on there. Damn California lawmakers!

The GAU-5 I carried when I was in had a 11.5 barrel with an A1 hider. So the only way for me to build a rifle like the one I was issued, which would be great to do, is to build it as a pistol. I can get every detail right aside from the stock, and the fact that it has to be semi-auto of course.

Just add it to the wish list!!!

I'm 1/3 of the way done with a CQBR (pistol) Clone right now. Not sure if it will ever get finished. Keep getting distracted.

[DarkGT]

Forgive my ignorance but are forward vertical handles allowed on these?

[ke6guj]

Originally Posted by DarkGT

Forgive my ignorance but are forward vertical handles allowed on these?

Not unless you have it registered as an AOW (any other weapon).

[hoppin62]

Originally Posted by CalGuns

my newly built ar pistol...

Is that the small GSE buffer tube on the back? What caliber is this?

[DarkGT]

Originally Posted by ke6guj

Not unless you have it registered as an AOW (any other weapon).

Got it thanks!

[hoppin62]

Originally Posted by DarkGT

Forgive my ignorance but are forward vertical handles allowed on these?

Originally Posted by ke6guj

Not unless you have it registered as an AOW (any other weapon).

Doesn't this fall in the same catagory as assault rifles?....
Since the magazine is locked/fixed and not detachable how does it fall into 12276.5 ?? Please, can someone help clarify this? Thanks.

(4) A semiautomatic pistol that has the capacity to accept a detachable magazine and any one of the following:
(A) A threaded barrel, capable of accepting a flash suppressor, forward handgrip,
or silencer.
(B) A second handgrip.
(C) A shroud that is attached to, or partially or completely encircles, the barrel that
allows the bearer to fire the weapon without burning his or her hand, except a slide
that encloses the barrel.
(D) The capacity to accept a detachable magazine at some location outside of the
pistol grip.

[ke6guj]

Originally Posted by hoppin62

Doesn't this fall in the same catagory as assault rifles?....
Since the magazine is locked/fixed and not detachable how does it fall into 12276.5 ?? Please, can someone help clarify this? Thanks.

its not state law that is the problem, you are right that the fixed-mag eliminates the AW issue, but it is the feds who feel that a VFG'ed handgun is an illegal AOW, unless properly registered.

http://www.atf.gov/firearms/041006-vert_grip.htm

ATF has long held that by installing a vertical fore grip on a handgun, the handgun is no longer designed to be held and fired by the use of a single hand. Therefore, if individuals install a vertical fore grip on a handgun, they are “making” a firearm requiring registration with ATF’s NFA Branch. Making an unregistered “AOW” is punishable by a fine and 10 years’ imprisonment. Additionally, possession of an unregistered “AOW” is also punishable by fine and 10 years’ imprisonment.

[hoppin62]

Originally Posted by ke6guj

its not state law that is the problem, you are right that the fixed-mag eliminates the AW issue, but it is the feds who feel that a VFG'ed handgun is an illegal AOW, unless properly registered.

http://www.atf.gov/firearms/041006-vert_grip.htm

Thank you for clearing that up!

[tacticalcity]

Ha..ha..I read the wrong page thinking I was on the last one.

This post was in response to "CAN I BUY A STRIPPED PISTOL LOWER BY ITSELF".

It has probably already been answered, but I figure it can't hurt to cover it again.

You need to send the guy you are buying it from a lower parts kit, bullet button, pistol buffer tube kit, and single shot SLED type magazine and have him put it together for you before shipping it to your FFL.

Some FFLs require you to have the upper before they will transfer it to you. Some only need the lower to be assmbled with a bullet button and single shot magazine. Mine did not requie me to have the upper. If you search on Gunbroker for Red River Tactical Pistol Lower, that seller will assemble the lower for you for an additional $20 fee. It is a great lower, had a snugger fit on my CMMG upper than even my CMMG lowers. He does have a few without logos on the opposite side if you dont like the additional engravings.

There are other ways...I find the above the be the easiest. Nobody is gonna transfer just the lower, at least so I've been told.

So I would start by buying the SLED, the Pistol Buffer Tube Kit, the Bullet Button and the lower parts kit. Once you have those, email the guy you want to buy the stripped pistol lower from and confirm that if you send him those parts he will assemble it for you. Then find out what your FFL is willing to transfer. Make the decision to purchase based upon their answers.

[hoppin62]

Originally Posted by tacticalcity

Ha..ha..I read the wrong page thinking I was on the last one.

This post was in response to "CAN I BUY A STRIPPED PISTOL LOWER BY ITSELF".

It has probably already been answered, but I figure it can't hurt to cover it again.

You need to send the guy you are buying it from a lower parts kit, bullet button, pistol buffer tube kit, and single shot SLED type magazine and have him put it together for you before shipping it to your FFL.

Some FFLs require you to have the upper before they will transfer it to you. Some only need the lower to be assmbled with a bullet button and single shot magazine. Mine did not requie me to have the upper. If you search on Gunbroker for Red River Tactical Pistol Lower, that seller will assemble the lower for you for an additional $20 fee. It is a great lower, had a snugger fit on my CMMG upper than even my CMMG lowers. He does have a few without logos on the opposite side if you dont like the additional engravings.

There are other ways...I find the above the be the easiest. Nobody is gonna transfer just the lower, at least so I've been told.

So I would start by buying the SLED, the Pistol Buffer Tube Kit, the Bullet Button and the lower parts kit. Once you have those, email the guy you want to buy the stripped pistol lower from and confirm that if you send him those parts he will assemble it for you. Then find out what your FFL is willing to transfer. Make the decision to purchase based upon their answers.

That is what I found out when I bought my AR pistol. Most FFL's will only transfer as a complete single shot pistol. Anvil Arms sells complete pistol lowers California ready.. you just have to provide them your pistol upper for them to ship out as a complete pistol.

[Exposed]

Originally Posted by hoppin62

That is what I found out when I bought my AR pistol. Most FFL's will only transfer as a complete single shot pistol. Anvil Arms sells complete pistol lowers California ready.. you just have to provide them your pistol upper for them to ship out as a complete pistol.

unless you do a ppt. I got my pistol lower from a ppt.

[hoppin62]

Originally Posted by Exposed

unless you do a ppt. I got my pistol lower from a ppt.

I did not know that! Anyone selling one?

[ke6guj]

Originally Posted by Exposed

unless you do a ppt. I got my pistol lower from a ppt.

how did the FFL do the handgun safety demo with a stripped lower?

[Exposed]

Here is mine next to my Kimber. I also posted one next to my Draco AK pistol.

pay no attention to the wolf .223 ammo/ or my bare feet with my alien PJ pants.

[tacticalcity]

Nice!!! What variant AK is your AK pistol build from?

[Exposed]

Originally Posted by tacticalcity

Nice!!! What variant AK is your AK pistol build from?

Draco AK pistol.