|
Commercial Sales For the Commercial sales of Firearms and Accessories. Read the rules before posting. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
DUELING TREE!!!! video updated 6-9-14
Dueling Tree made with AR500 paddles
By purchasing these you'll actually be supporting two vendors, myself and TheTargetMan! The stand is my DUAL purpose stand, use for the tree or use for 1x2 wood strips to mount your various other targets. Tree is approx 5.5' tall and disassembles without the use of any tools!!!!! (if you want tree taller, pm me and I can make at a custom height to better fit your needs) Tree tilts at approx 15 degrees to allow the paddles to fall forward when shot to each side. $360 picked up in 707 Vacaville/Vallejo/Napa. Sorry I can not ship it but for a fee we can work out a "delivery" *NOTE all trees come with the upgraded pivots now Thanks Steve VIDEO LINK..... http://youtu.be/-QQwpm2kSTY Last edited by svc707; 12-27-2020 at 6:19 AM.. |
#2
|
||||
|
||||
Ever think of making 10" disks that you can hang on a 2x4?
I can see this would be very good for IDPA practice it would save all the practice time taping
__________________
Spreading the WORD according to COLT. and Smith, Wesson, Ruger, HK, Sig, High Standard, Browning |
#3
|
||||
|
||||
Just picked up a setup of tree and some additional stands and targets - thanks Steve!
... I now need a few new friends within an hours drive of the bay area with private land or range access where we can try these out (PM me!) :-) |
#5
|
||||
|
||||
Just picked up my tree! Love it and highly recommend buying from Steve
Quote:
__________________
Buy from Amazon? Use this link to shop and earn money for CGF at the same time! @rvizzone @Cal2ARecall Last edited by rvizzone; 06-09-2013 at 6:37 PM.. |
#6
|
||||
|
||||
Last edited by svc707; 11-20-2017 at 12:42 PM.. |
#9
|
||||
|
||||
They are 6" in diameter x 3/8th thick AR500 material
Ill post a picture Last edited by svc707; 07-17-2013 at 5:17 PM.. |
#11
|
||||
|
||||
sorry cant use that unless it was a drill press. I need consistent holes in accurate locations
|
#15
|
||||
|
||||
Can you give some ideas around how these work with different caliber bullets? Will a 9mm spin these around? What about a .22? Is a .30-30 too much? What is the optimal distance for 5.56? Any thoughts would be helpful. Thanks!
-Scott |
#17
|
||||
|
||||
I'll take one per our texts
Vee
__________________
Need Auto Collision repair / Bay Area ? See my thread !! http://www.calguns.net/calgunforum/s...d.php?t=476124 |
#20
|
||||
|
||||
Ive had the ar500 shot at with 308 @20yrds and did not blow through just pock marks but a weatherby 300 went through
Pms replied Last edited by svc707; 04-08-2014 at 8:05 AM.. |
#21
|
||||
|
||||
Bump I have one tree with 6 paddles left for sale.
Im not sure when I will actually be making more as of yet. as Ive got a lot of large orders I need to fill of my stands and unfortunately the trees take more time to make that I don't have right now. |
#24
|
||||
|
||||
Ive sold atleast 15 trees all to buyer here in the bay area since I don't ship these. and most all of them are shooting in open BLM lands. but most buyers for the trees have come from the south bay and some from sacramento area.
|
#25
|
||||
|
||||
now offering with optional shields to protect paddle tubes for those bad shots =). shields can be cut off when needed and replaced.
30" footprint with more room in front of base to add additional target mounts when not using the tree post. for example welded 2x4 mount for single large gong |
#26
|
||||
|
||||
HERES'S WHAT EVERYONE HAS BEEN WAITING FOR!!!!!!
A VIDEO..... http://youtu.be/-QQwpm2kSTY Sorry i dont post much anymore, but from the day job to taking care of my daughter... its tough to keep up on updating posts. I recently sold 4 trees this past week. I have enough material to make two more sets of 6 paddles Last edited by svc707; 06-09-2014 at 8:28 PM.. |
#28
|
||||
|
||||
Pm sent.
__________________
"...it is time for gun owners to become as unreasonable as gun haters with their rhetoric, not their actions. Storming into Chipotle with automatic weapons is not the answer. Demanding truth and accountability and then destroying their arguments with calm logic and common sense is. Get started, before the cops knock at your door…" -Rob Williams |
#29
|
||||
|
||||
When are you coming down. I'll pass it on to the guys I go shooting with and see if they want anything
|
#30
|
||||
|
||||
looks like i might be heading to reno/sac this weekend not for sure yet but text or email me to setup FTF
|
#31
|
||||
|
||||
up to the top
|
#32
|
||||
|
||||
bump....
Vallejo Gun Show is coming.... Im only couple miles away |
#33
|
||||
|
||||
Bump... I've started new job in Napa so if your local text me for FTF
Im located off Soscol ave. Thanks Steve |
#34
|
||||
|
||||
WoW, just picked-up a Dueling Tree from Steve last week. Took it out yesterday with my wife and had some real gun fun! The Tree functions perfectly and breaks down for transport. Warning, ammo will be used at an alarming rate!
|
#35
|
||||
|
||||
Bump.... Ive had requests for a two paddle setup. Working on a full shielded with upgraded pivot tubes which will work great for those doing long distance rifle shooting!!!
|
#36
|
||||
|
||||
Cool! Let's see it!
|
#38
|
||||
|
||||
Here's another 2 paddle setup with upgraded pivot tubes, front shields and 2x4 post. $250!!! w/ 12" ar500 gong and 2x4 hanger kit.... $300 SOLD Last edited by svc707; 04-20-2021 at 3:44 PM.. |
#39
|
||||
|
||||
Here is the tree i got for my birthday (thanks pops). The tree works great and has probably 500 rounds so far with no problems. Im glad pops added the sheilds as the allready helped the life of the stand. It has seen 556, 30-06, 30 carbine, 308, 762x39, and some pistol rounds without any damage to the paddles. Great product and i couldnt be more happy.
Also.... Nice chevelle!!! |
#40
|
||||
|
||||
Good morning,
all out of dueling trees... But but will have three 6 paddle sets ready to go next weekend. one with upgraded pivot tubes with shields and two standard trees with or without the shields, you choose before picking up. |
Thread Tools | |
Display Modes | |
|
|