|
Curio & Relic Gallery Post pictures of your favorite milsurp here. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
Mosin-Nagant Picture Thread
I thought it was time we had a thread dedicated to these ugly rifles.
My M44: Bought it from another member here. I'll have to take some new pictures of my 91/30. What do you all have? |
#7
|
||||
|
||||
Nice, Looks like a Dragoon to me. If you ever want to sell it look me up.-g
__________________
If ever time should come, when vain and aspiring men shall possess the highest seats in Government, our country will stand in need of its experienced patriots to prevent its ruin. -Samuel Adams |
#8
|
|||
|
|||
Some Finns:
My Frakenmosin, assembled from parts. Ishevsk barrel, Polish low wall receiver, and a parts mix of every single arsenal: This is my Bubba job, and the link below will take you to the confessional: Confessional thread: http://www.surplusrifleforum.com/vie...lit=I+am+Bubba for those of you who don't go to the confessional thread, I made it out of a cut down barreled receiver I got for I think 5 bucks at a gun show in Chico. It is one of those projects where you spend $200 to get a $100 rifle you can sell for $80. Doesn't get much better. :-) CDFingers |
#14
|
||||
|
||||
__________________
Benelli Montefeltro 12g,,, mossberg 500 12g,,, Ruger M77 Mark II 30-06 w/bushnell scope,,,, Remington 700 SPS 22-250 w/Leopold scope,,,, Ruger Mini14 iron sights,,, S&W 357 mag, S&W 44 mag,S&W 38 special,, S&W Sigma 9mm.,,, Mosin Nagant M91/30, .303 British Browning .243 Lever Action,,, H-S Precision 338 Lapua |
#15
|
||||
|
||||
Nice scout Jaiofspam! If you don't mind, what is the mount and scope you have on there? And how is it holding up for you? Thanks.
Beautiful Mosins guys... Will need to take pics of mine soon. |
#16
|
||||
|
||||
Quote:
as for the scope its a ncstar 2-7x32 LER... for something that cost $35 its holding up very very very well to the recoil of the mosin while still holding zero |
#17
|
||||
|
||||
Awesome, thanks Jaiofspam! I have read some negative reviews regarding the side-mounted brass screws configuration of Darrel's scount mounts so I was thinking about giving S&K and/or B-Square mounts a try...
Thanks again for the review. |
#18
|
||||
|
||||
Quote:
you could always give the cheapy ncstar mounts found all over the web a try for about $10... my buddy uses this config and its holding up fine. my only gripe with the ncstar mount is that the hex screws strip easily |
#21
|
||||
|
||||
My M44
My all matching 1946 Izhevsk M44
__________________
. HELLer YES!!
|
#23
|
||||
|
||||
I got one of those. Everyones probably gonna hate me for it though.
http://viewmorepics.myspace.com/inde...ageID=53604777 |
#24
|
||||
|
||||
Quote:
__________________
"America is not at war. The Marine Corps is at war; America is at the mall." Quote:
|
#26
|
||||
|
||||
Quote:
__________________
__________________ "Knowledge is power... For REAL!" - Jack Austin |
#27
|
||||
|
||||
Cross fingers either I'll be hung upside down and burned or people might just like the mods
More Picture of the Mosin Nagants Ignore my Romanain PSL |
#28
|
||||
|
||||
The middle M44 and the bottom M91/30 are laminated stocked, the top M38 is hard wood.
Not much you can do to refinish a laminated stock other than clean off cosmoline and shellac (if used) then either reapply shellac or oil. The hard wood is easier to sand down, stain and oil because you don't have epoxy to deal with. |
#29
|
||||
|
||||
Here are mine...
Mosin-Nagants are just too ugly to take outside though.
__________________
__________________ "Knowledge is power... For REAL!" - Jack Austin |
#31
|
||||
|
||||
My Finn
Shoots sub-moa on a cold barrel with surplus Hungarian if I do my part. Groups open to 2 on a warmer barrel. I love this thing.
__________________
Quote:
|
#33
|
||||
|
||||
Here's mine!
__________________
http://bailey.posterous.com |
#35
|
||||
|
||||
Real Deal! 1943 PU Sniper
1943 M38 Laminate 1944 non refurbed M44 Laminate My website http://thedolk.com/ |
#37
|
||||
|
||||
I suppose I could post my PU snipers...
p.s. One of these just happens to be for sale in the private sales forum. |
#39
|
|||
|
|||
Also have a bastardization of a 91/30 cut down to carbine length (i didn't do it, bought it as a parts gun for next to nothing.... the receiver is hex and 1937 production... such a waste ) |
Thread Tools | |
Display Modes | |
|
|