|
|
|
|
|
|
|
|
|
 |
|
|||||||
| Competition, Action Shooting And Training. Competition, Three gun, IPSC, IDPA , and Training discussion here. |
 |
|
|
Thread Tools | Display Modes |
|
#2
03-16-2017, 6:18 PM
|
||||
|
||||
Jin-
I don't understand the question- is that legal for carry optics? Competition, Action Shooting And Training. Competition, Three gun, IPSC, IDPA , and Training discussion here. What class or competition are you referencing?  https://www.ssusa.org/articles/2016/...-carry-optics/
__________________
Rule 1- ALL GUNS ARE ALWAYS LOADED Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs) Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT (thanks to Jeff Cooper) Last edited by hermosabeach; 03-16-2017 at 6:21 PM.. 
|
|
#3
03-16-2017, 6:27 PM
|
||||
|
||||
|
https://www.uspsa.org/
https://uspsa.org/document_library/2...DNROI_2117.pdf 17 Slide Ports Permitted Yes, on factory original approved models 21.2b Milling of slide — only as required to insert optical sights A slide may be modified specifically for the purpose of installing optical sights or cocking serrations. Textured finishes, grip tape, milling or stippling on the slide to provide texture is also allowed. Cuts that are designed to specifically or significantly lighten the slide, such as holes, are ruled as competitive advantage and prohibited.
__________________
Rule 1- ALL GUNS ARE ALWAYS LOADED Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs) Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT (thanks to Jeff Cooper)
|
|
#4
03-16-2017, 6:29 PM
|
||||
|
||||
|
So having your factory slide machined or buying a lone wolf and having it machines to fit an RMR might be a better choice
After-market slides and barrels – provided they are the same length, con- tour and caliber as original factory standard. SLIDES: Current rules remain in effect – You may replace the slide with an OFM or aftermarket slide which is of the same length, contour and caliber as the original slide for that model of gun. BARRELS: Current rules remain in effect - you may replace the barrel with an OFM or aftermarket barrel which is of the same length, contour and caliber as the original barrel for that model of gun. Special Notes/Clarifications: For purposes of this interpretation, a barrel within +/- 0.1” of OFM is “the same length”. Barrels of the same length, contour and caliber but with different crown profiles are authorized.
__________________
Rule 1- ALL GUNS ARE ALWAYS LOADED Rule 2 -NEVER LET THE MUZZLE COVER ANYTHING YOU ARE NOT PREPARED TO DESTROY (including your hands and legs) Rule 3 -KEEP YOUR FINGER OFF THE TRIGGER UNTIL YOUR SIGHTS ARE ON THE TARGET Rule 4 -BE SURE OF YOUR TARGET AND WHAT IS BEYOND IT (thanks to Jeff Cooper)
|
|
#5
03-16-2017, 6:33 PM
|
|||
|
|||
|
The Zev slide has to be basically be a clone of the stock Glock slide. After that the only mod that is legal to the slide is a cut for the optic.
All of the Zev slides (that are on their website) are fancy. So currently none of the Zev slides are going to be legal for CO.
|
|
| Thread Tools | |
| Display Modes | |
|
|
 |
 |
 |
Linear Mode
