New Primary Arms 1-6x with ACSS reticle!

[PrimaryArms]

Originally Posted by mievil

does the rear cap spin with the magnification?

No the rear does not spin just the knob

Dimitri

[efmk4]

I am interested in one also....

[Whiterabbit]

Now you just need one with long eye relief for "scout" style configs. Are "scout" rifles still in fashion?

[LINKS001]

ACSS 6x fixed optics shoots superb. ACSS 1-6x is just even sexier and more options with magnification. I like how PA is rolling with this one. Yall already bought me, put me one on reserves.

JOHN

[slade_w]

Couldn't quite find it, but what size is the center dot?

[PrimaryArms]

Originally Posted by slade_w

Couldn't quite find it, but what size is the center dot?

1 MOA what were you looking for?

Dimitri

[slade_w]

No particular dot size. Just as long as I can see it. Near sighted, certain reticles I can't make out. Prefer not so use eyeglasses. Can see the Mueller Speed Shot 4 moa Weaver v10 fine. Burris MTAC 1-4, just barely make out the 2.4 moa dot. Weaver V3, crosshair too thin to see. I'll give this one a try

[PrimaryArms]

Originally Posted by slade_w

No particular dot size. Just as long as I can see it. Near sighted, certain reticles I can't make out. Prefer not so use eyeglasses. Can see the Mueller Speed Shot 4 moa Weaver v10 fine. Burris MTAC 1-4, just barely make out the 2.4 moa dot. Weaver V3, crosshair too thin to see. I'll give this one a try

The horseshoe is almost 9 moa you can see that no problem.




Dimitri

[slade_w]

I'll have to wait and see. I'd like to use it to it full potential. I'd just hate to have to return another scope. Have already wasted a lot of money on return shipping and restock fees.

[PrimaryArms]

Originally Posted by slade_w

I'll have to wait and see. I'd like to use it to it full potential. I'd just hate to have to return another scope. Have already wasted a lot of money on return shipping and restock fees.

What scopes have you owned?

Dimitri

[slade_w]

Not many. The four listed for my first AR build and a couple beater Bushnell Banners and an Optisan Mamabe for my plinkers. Of the four, I kept the V10 because I got it on sale and sold the MTAC. I returned the Mueller and V3. Would have loved the V3 being that It's light and short. I've looked through Leupold VX-R's and the Vortex PST. Couldn't see anything in the Vortex. VX-R's weren't close to 1x as I'd want them to be.

[MrPlink]

How 1x is the lowest setting?

[PrimaryArms]

Originally Posted by MrPlink

How 1x is the lowest setting?

For me 1x is at 1-1.5


Dimitri

[MrPlink]

Thanks

[BigAssWhiteBoy]

Weight?

[slade_w]

1.04 lbs. Specs up on their website.

[masig83d]

Can you give us an ETA on the availability of this scope.

[PrimaryArms]

It should be here late September early November.

You might want to go on website and sign up for notification when in stock we have has an overwhelming demand.

Dimitri

[masig83d]

Thanks Dimitri for the suggestion.

Ciao
Noel

[PrimaryArms]

Originally Posted by masig83d

Thanks Dimitri for the suggestion.

Ciao
Noel

No problem let me know if I can help further.

Dimitri

[slade_w]

How durable is it? Would it survive a 5 ft drop and stay zeroed?

[PrimaryArms]

Originally Posted by slade_w

How durable is it? Would it survive a 5 ft drop and stay zeroed?

Never dropped 5ft down but had a reloaded case that was neck sized only stuck in chamber , I was first bouncing then after frustration kicked in pounding the rifle while pulling charging handle to extract! Had to stop because I though I was going to break butt stock. Then broke my cleaning rod, hammered at charging handle until it broke! Finally disassembled upper! Used AR tool to pry bolt open! Lol I know it was crazy! After cleaning and reassembling I shot the next day thinking noway it held after that beating! it was still grouping on the orange! So 5ft is nothing to what happen that day lol.

Dimitri

[slade_w]

LOL...Yeah I've had those kind of issues before. Good to know. Now I'm just itchin for the release day.

Thanks Dimitri

[PrimaryArms]

Originally Posted by slade_w

LOL...Yeah I've had those kind of issues before. Good to know. Now I'm just itchin for the release day.

Thanks Dimitri

These scopes are tough and well made. We don't claim Eotech/Aimpoint/Acog reliability but more then enough for even the guys that run guns hard! Scopes today are not what they used to be they are far more reliable. Also because the reticle is laser edged on glass there are no moving parts so its dead on!

Dimitri

[Darklyte27]

are they here yet?

[PrimaryArms]

Originally Posted by Darklyte27

are they here yet?

Hey Marine!

No we are hoping September.

Dimitri

[kkp]

Tagged...

[Darklyte27]

Thanks

Originally Posted by PrimaryArms

Hey Marine!

No we are hoping September.

Dimitri

[PrimaryArms]

Originally Posted by Darklyte27

Thanks

No problem

Dimitri

[mpncc]

Question you said the reticle can be matched to 308 as well will that be 150gr 308 like most or possibly 168gr like most of us would like haha I was just hoping there was a magnification level that might match up 168gr
Thanks

[PrimaryArms]

Originally Posted by mpncc

Question you said the reticle can be matched to 308 as well will that be 150gr 308 like most or possibly 168gr like most of us would like haha I was just hoping there was a magnification level that might match up 168gr
Thanks

Look on the bottom for the .308 loads dial 1" high at 100 and 168 will line up at 2600-2650 fps



Dimitri

[ummmmmm456]

primary arms guys..... i'm waiting, when do you expect this thing out in the wild?

[lewdogg21]

Originally Posted by ummmmmm456

primary arms guys..... i'm waiting, when do you expect this thing out in the wild?

He said it already twice on this page. September-November.

[PrimaryArms]

Originally Posted by ummmmmm456

primary arms guys..... i'm waiting, when do you expect this thing out in the wild?

Will not not be long should be September. Be sure to sign up to be notified we have received an overwhelming response.

Dimitri

[dok]

Cant wait-this could be an industry changer

[PrimaryArms]

Originally Posted by dok

Cant wait-this could be an industry changer

All I can say is that it works!
For me it fills the red dot scope gap or CQB/ Med range.Meaning for up close CQB type shooting with red dot is ideal well at 1-2x it looks like this

This allows me to be as fast as with any red dot with both eyes open.
At 6x it allows me to very quickly range targets out to 800 and hit them! Anyone that shoots further out can tell you wind is a huge factor and the 5mph wind dots make a huge difference as a point of reference. If its a 10 mph wind all I do is double the 5mph hold or cut it in half its a 2.5 and so on.

600 yards using a 16" AR and M193 3-5 mph wind full value.


800 yards fired 10 rounds off the hood of my jeep only 3 hit due to shift in wind with one on the wood about where jewels normally are! Lol still thats 30% ratio with 5.56 at 800!
5-7 mph wind quarter value.

800 yards 10 rounds fired

The BDC is dead on its the wind that you ll have to master. If I want to insure a hit lets say at 800 and there is 5-7 mph wind I ll very quickly fire 3 rounds 1 at 3mph one at 5mph and one at 7mph holds one will hit! I try and what I call slice the area.
We hope it does change the industry I know it has changed my optics/shooting from this point on. There is a DMR in .308 ACSS HUD in the works that we hope will breach the Med/LR range it will be in our 4-14FFP and is a ways out.

Dimitri

[Hot Holster]

Will the 7.62 model work with the 300 Blackout, both supersonic and subsonic?

[PrimaryArms]

Originally Posted by Hot Holster

Will the 7.62 model work with the 300 Blackout, both supersonic and subsonic?

With 300 ACC Blk out
It will work with 110 gr as far as the sub it will work but will end up in odd numbers.

Dimitri

[Nrai2020]

From my understanding from the youtube video... this scope is specific to a 5.56 round and to certain barrel lengths? Really cool concept!! So when buying the scope you have to buy the correct one given your barrel length and caliber?

Will there be scopes made for .308? 7.62x39? 7.62x54?

[PrimaryArms]

Originally Posted by Nrai2020

From my understanding from the youtube video... this scope is specific to a 5.56 round and to certain barrel lengths? Really cool concept!! So when buying the scope you have to buy the correct one given your barrel length and caliber?

Will there be scopes made for .308? 7.62x39? 7.62x54?

The 1-6 is compatible with some .308
But there is a DMR 4-14FFP ACSS HUD but more set for Med/LR then CQB as far as the 7.62x54R if you get me your fps grain bullet and BC I can tell you how it will line up.

As far as dialing in what you do is dial in accordingly
Here is the chart hope this helps.
What's your barrel length ammo and altitude?


Dimitri