45 ACP 185gr LHP

[hundy]

I got some Lead hollow points 185grain for my 45 ACP from Precision Delta.
I was looking to see if anyone has any load data for the bullets. Having a hard time finding some info. I can find data on 185 grain Jacketed, but not for Lead.
Anyone have any data or a link to a data source, I would appreciate it.

Thank you

Jay

[mark501w]

Just use 230gr data to start with.

[stilly]

Damn straight. I am willing to bet that 5.0gr of HP-38 will give you a sweet round...

I say that because 5.0gr of HP-38 is a great load for a LOT of .45 weights. And by lot I mean 200, 220, 230... So why not 185?

[Bastard]

my lyman cast book shows 5.4 of 231 starting if that helps

what powder are you using?

[Bastard]

better yet;
sorry for the bad pic, I'm late for work.

[stilly]

Originally Posted by Bastard

better yet;
sorry for the bad pic, I'm late for work.

Of course that looks better. Since it is a lighter bullet you need to fill more space up behind it... okay so 5.0 might not cycle. But it is great for the others...

[koehn,jim]

xThe Reddot loads shown and the 700x work and and are not bad to shoot.

[hundy]

Thanks for the information. I am going to try to locate one of the powders mentioned.

Thanks again

Jay

[MR_X]

I Just did a new load today on the same bullet. I used 7gr of Longshot and it was nice, a bit snappy but nice. I was going to sale all my Longshot but decided to keep it as a back up powder. I used 7.0 gr of powder, 1.250 OAL and a .469 crimp. If I have to use Longshot again I will up the charge to 7.2. Hodgdon reloading data has a starting at 7.2gr minimum and 8.2 gr max load with a 185gr LSWC bullet so I used this as a starting point. Attached is a picture of my target that I was practicing double taps at different distances (3-15 yards).