Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > MARKETPLACE > Deals, Sales and Coupons
Register FAQ Members List Calendar Mark Forums Read

Deals, Sales and Coupons Found a good deal or sale? Got a coupon or code? Share them here!

Reply
 
Thread Tools Display Modes
  #1041  
Old 06-19-2018, 10:06 AM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Quote:
Originally Posted by nubrun View Post
Interesting. Are you sure it just isnít locked because you havenít released it with the slide lock? I have seen that get a lot of people.
Idk I will check when I get home tonight.

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1042  
Old 06-19-2018, 10:25 AM
willidru willidru is offline
Junior Member
 
Join Date: Apr 2012
Posts: 56
iTrader: 0 / 0%
Default

Anyone in the Bay Area group doing an easy bolt?
Reply With Quote
  #1043  
Old 06-19-2018, 1:03 PM
obpwankel's Avatar
obpwankel obpwankel is offline
Senior Member
 
Join Date: Dec 2009
Posts: 734
iTrader: 0 / 0%
Default

https://youtu.be/-wyxiD9O83o

???
Reply With Quote
  #1044  
Old 06-20-2018, 12:18 AM
Flanders's Avatar
Flanders Flanders is offline
Junior Member
 
Join Date: Sep 2010
Posts: 48
iTrader: 1 / 100%
Default

Re: Laser engraving
Something to be aware of, for those who haven't engraved their FCU.

I just got back from Bulleye Bishop. They do a good job and are pretty quick. When I came by 2-3 weeks ago to do the engraving, I wasn't told that Evan was out of the shop that day. Only let Evan or Aaron do the work. I left my FCU there for the engraving and someone else did the work and the positioning is kind of funky.

The serial number is so far to the right that the last digit is almost out of the window - the entire s/n is visible but it's close to the edge. My name and city was engraved in an area that, when the holes are drilled (soon to be drilled), the holes would obliterate the markings. When I went to pick up the FCU, Aaron noticed the problem and re-engraved the marking.

What should have happened: Seat the FCU into the grip module. Take a fine point Sharpie and trace the s/n window. Now you know the approximate area to engrave.

I'm a little annoyed at the employee's lack of training but it's a homebuild, not a work of art, and you'll never see the FCU unless you're cleaning it. We'll see what happens during the Etiquette Symposium.
__________________
Hey Homie, I can see your doodle.

Last edited by Flanders; 06-20-2018 at 12:24 AM..
Reply With Quote
  #1045  
Old 06-20-2018, 12:50 PM
BayMaverick BayMaverick is offline
Member
 
Join Date: Jan 2016
Location: East Bay
Posts: 201
iTrader: 5 / 100%
Default

Hi Everyone, in case there are any lurkers on the thread who wanted in on the group buy but weren't able to (or if you find yourself wanting to buy a 2nd kit) I have decided to sell my kit for 9mm Compact for the same amount that I bought it for as I need the cash. I've posted in the Marketplace (https://www.calguns.net/calgunforum/....php?t=1457035) but am posting here as well with nubrun's permission. I'm currently #6 out of 14 in the Bay Area queue and nubrun has agreed to allow my buyer to take my place in the queue if he/she wishes. I have also communicated with Flanders who is organizing the Bay Area Symposium and he has agreed to allow my buyer to attend the Symposium if he/she wishes. Thanks and good luck to all of you with your builds!
Reply With Quote
  #1046  
Old 06-21-2018, 1:09 AM
sitruc sitruc is offline
Member
 
Join Date: Nov 2016
Location: SGV
Posts: 298
iTrader: 2 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Very correct. Use alot of cutting oil, compressors helps to clear out debris. If someone has a reamer tool or a debur yooo that would help instead of files to debur, works fine but just takes longer.

I got these ones

https://www.amazon.com/Rely2016-Prac...ref=mp_s_a_1_8

Simple cheap dont press and pull towards you to hard you can actually make the hole bigger if you pulls it past the rolled shaft of the tool and start removing material from the ID of the hole

Sent from my SM-N950U using Tapatalk
Thanks for the tip about the deburring tool. I could NOT get my pins to set until I took a deburrer to the inside edge of all the holes.

Quote:
Originally Posted by nubrun View Post
Big thanks to all of the IE folks from the weekend! Everyone was more than generous and prepared prior to arriving which was crucial for things to go smooth.
Massive thanks to you, Nick for "consulting" on building out our FCUs. I stupidly left without sending any cash your way for drill bits, expertise, etc. I'll be sure to rectify this soon.

I wanted to update this late because I finally just completed it (thankfully I am on vacation). Fully assembled, striker goes click every time, everything seems to be functioning well and I am going to take it out this Saturday for real testing.

I want to add for others that the positioning of the FCU in the grip module is important to get things to function normally. I initially seated the FCU as far back as I could while having the takedown lever holes match up. Everything was super tight and the trigger was sticking/not resetting even with grease and lube. It took a brass hammer just to pivot the takedown lever all the way down. It was so tight, the slide would not come off unless I completed rotated the takedown lever all the way around. The slide stop was engaging every time I pulled back on the slide even with no mag inside.
I moved it forward by a few millimeters and it functioned perfectly. Basically, do not make the back completely flush with the grip module (at least with the medium compact module). Make sure the slide stop levers are able to move freely and then stop pushing the FCU back.
I also watched Alma Cole's Dissassembly/Reassembly "post upgrade" video at least a dozen times.


Good luck fellow builders!
__________________
Quote:
Originally Posted by colossians323 View Post
Ö Freedom is more than just gun rights and weather
Reply With Quote
  #1047  
Old 06-21-2018, 7:34 AM
F&F FIREARMS F&F FIREARMS is offline
Vendor/Retailer
 
Join Date: Apr 2018
Posts: 94
iTrader: 0 / 0%
Default

So I have some great news people. The last couple X5s and X carrys yo complete this group buy arrived yesterday. Going out today!! Also have some extras(not at group price) Thanks to all that participated.
Reply With Quote
  #1048  
Old 06-21-2018, 2:06 PM
RuMasco RuMasco is offline
Member
 
Join Date: Nov 2016
Posts: 168
iTrader: 3 / 100%
Default

Good freaking news Chris
Reply With Quote
  #1049  
Old 06-21-2018, 4:15 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

first off thanks to everyone for all the post for help and issues. i found the problem and it was the safety take down bar is not resetting. but now my problem is that it is always doing the same thing i have to manually reset it every time i put the slide on. another problem for another day.

Jcarp yes im have the same problem i have to yank that slide off to get it completely off.
Reply With Quote
  #1050  
Old 06-21-2018, 4:28 PM
nubrun's Avatar
nubrun nubrun is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Jul 2012
Location: Riverside, CA
Posts: 1,110
iTrader: 29 / 100%
Default

Quote:
Originally Posted by lamduh View Post
first off thanks to everyone for all the post for help and issues. i found the problem and it was the safety take down bar is not resetting. but now my problem is that it is always doing the same thing i have to manually reset it every time i put the slide on. another problem for another day.
Use Jcarps solution above where he bends the front of the of the slide lock up a bit to allow the slide lock to go higher in the rear. That should solve the problem. It doesn't take much.

Color the top of the insert with sharpie and see where its rubbing. Let's do a Magnum range day next week and see how those actually run.
Reply With Quote
  #1051  
Old 06-21-2018, 6:33 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Quote:
Originally Posted by nubrun View Post
Use Jcarps solution above where he bends the front of the of the slide lock up a bit to allow the slide lock to go higher in the rear. That should solve the problem. It doesn't take much.

Color the top of the insert with sharpie and see where its rubbing. Let's do a Magnum range day next week and see how those actually run.
So Sharpie on the slide rails ?

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1052  
Old 06-21-2018, 6:35 PM
nubrun's Avatar
nubrun nubrun is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Jul 2012
Location: Riverside, CA
Posts: 1,110
iTrader: 29 / 100%
Default

Quote:
Originally Posted by lamduh View Post
So Sharpie on the slide rails ?

Sent from my SM-N950U using Tapatalk


And the ejector. You want to see where itís rubbing to figure out why itís hard to remove.


Sent from my iPhone using Tapatalk Pro
Reply With Quote
  #1053  
Old 06-21-2018, 6:37 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Range trip maybe this weekend ?
Quote:
Originally Posted by nubrun View Post
Use Jcarps solution above where he bends the front of the of the slide lock up a bit to allow the slide lock to go higher in the rear. That should solve the problem. It doesn't take much.

Color the top of the insert with sharpie and see where its rubbing. Let's do a Magnum range day next week and see how those actually run.
Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1054  
Old 06-21-2018, 8:06 PM
Jcarp03 Jcarp03 is offline
Member
 
Join Date: Mar 2018
Location: Corona, CA
Posts: 115
iTrader: 1 / 100%
Default

Range report
Just came back from RMR
Shot 250 rounds of UMC 115g Walmart ammo
Zero jam, malfunctions whatsover
Shot soft and beautiful
GG trigger kit is amazing at 3.5lbs maybe even less?

Pic below is the first 40 shots on the left
And 40 shot on the right at 20ft
needed a bit of sight adjustment


Sweet gun


Note: SS guide rod and 13lb 1911 Springs installed
Reply With Quote
  #1055  
Old 06-21-2018, 8:10 PM
nubrun's Avatar
nubrun nubrun is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Jul 2012
Location: Riverside, CA
Posts: 1,110
iTrader: 29 / 100%
Default

Very cool man!
Reply With Quote
  #1056  
Old 06-21-2018, 8:20 PM
hamster07 hamster07 is offline
Junior Member
 
Join Date: Sep 2012
Location: Orange County
Posts: 77
iTrader: 1 / 100%
Default

Hey, heads up for all of you with an X5 and want a Romeo1 or just want one period. Optics planet has the romeo1 for 299 https://www.ebay.com/itm/312168270317 and ebay has a 15% off sale with code PLAYFUL15 to get it for 254 and change. Best price I have seen it.
Reply With Quote
  #1057  
Old 06-21-2018, 8:55 PM
RuMasco RuMasco is offline
Member
 
Join Date: Nov 2016
Posts: 168
iTrader: 3 / 100%
Default

Quote:
Originally Posted by Jcarp03 View Post
Range report
Just came back from RMR
Shot 250 rounds of UMC 115g Walmart ammo
Zero jam, malfunctions whatsover
Shot soft and beautiful
GG trigger kit is amazing at 3.5lbs maybe even less?

Pic below is the first 40 shots on the left
And 40 shot on the right at 20ft
needed a bit of sight adjustment


Sweet gun


Note: SS guide rod and 13lb 1911 Springs installed
Is that a paint job or a wrap on the grip
Reply With Quote
  #1058  
Old 06-21-2018, 9:12 PM
Jcarp03 Jcarp03 is offline
Member
 
Join Date: Mar 2018
Location: Corona, CA
Posts: 115
iTrader: 1 / 100%
Default

Its grip tape from Springer prescision i may remove it though as it doesnt stay where it should it shifts where my left palm pushes downward i will try Talon grips next
Reply With Quote
  #1059  
Old 06-21-2018, 9:54 PM
21guns's Avatar
21guns 21guns is offline
Member
 
Join Date: Feb 2014
Posts: 392
iTrader: 79 / 100%
Default

Quote:
Originally Posted by Jcarp03 View Post
Its grip tape from Springer prescision i may remove it though as it doesnt stay where it should it shifts where my left palm pushes downward i will try Talon grips next
Are those regular full size magazines with baseplates? Iím curious of your magazines setup. Iím having problems getting factory X5 mags but I do have full size mags.
Reply With Quote
  #1060  
Old 06-21-2018, 9:55 PM
21guns's Avatar
21guns 21guns is offline
Member
 
Join Date: Feb 2014
Posts: 392
iTrader: 79 / 100%
Default

I just noticed you don’t have a magwell. Never mind.
Reply With Quote
  #1061  
Old 06-21-2018, 10:48 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Anybody got a spare slide catch..... I broke mine trying to bend it

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1062  
Old 06-22-2018, 8:48 AM
Marxman's Avatar
Marxman Marxman is offline
Member
 
Join Date: Jun 2009
Location: North Bay
Posts: 457
iTrader: 3 / 100%
Default

Quote:
Originally Posted by 21guns View Post
I just noticed you don’t have a magwell. Never mind.
I have the magwell and full sized magazines too. I did an experiment to shave the basepad down to make it work and long story short it does but you have to grind on it a lot with a sander or dremel.

I took off a lot of material and have maybe 1/8" of material between laterally between the actual metal portion of the magazine and the base on either side. I had to entirely remove the wings on the top and that got shaved down to approximately 1/8" as well between that same metal part and the base in the vertical direction toward the magwell. Making it fit in the magwell if you have a rounded magazine (like I did) required you to square it off with a dremel. All in all in about 5 minutes working carefully I now have a shaved down factory full size mag that works in the magwell, drops free, and is generally nice to work with.

It's a DIY fix but there's a solution on the way. When Sig releases the SQUARE bottom for the mags separately (the only have rounded basepad available to purchase right now) or if you have a square bottomed magazine already its supposedly compatible in the regular full sized mag with the magwell.
__________________
Get Involved:

What Have You Done Today?
Reply With Quote
  #1063  
Old 06-22-2018, 8:56 AM
rmnc3r's Avatar
rmnc3r rmnc3r is online now
Member
 
Join Date: May 2017
Posts: 169
iTrader: 1 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Anybody got a spare slide catch..... I broke mine trying to bend it

Ebay
https://www.ebay.com/itm/GENUINE-FAC...ss!90620!US!-1

or

Brownells
https://www.brownells.com/handgun-pa...rod108031.aspx
Reply With Quote
  #1064  
Old 06-22-2018, 9:04 AM
nubrun's Avatar
nubrun nubrun is offline
CGN/CGSSA Contributor
CGN Contributor
 
Join Date: Jul 2012
Location: Riverside, CA
Posts: 1,110
iTrader: 29 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Anybody got a spare slide catch..... I broke mine trying to bend it

Sent from my SM-N950U using Tapatalk
I may have one... Let me look tonight? Is it the full size one?
Reply With Quote
  #1065  
Old 06-22-2018, 9:04 AM
hamster07 hamster07 is offline
Junior Member
 
Join Date: Sep 2012
Location: Orange County
Posts: 77
iTrader: 1 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Anybody got a spare slide catch..... I broke mine trying to bend it

Sent from my SM-N950U using Tapatalk
https://www.sigsauer.com/store/p320-...-9-40-357.html

Sent from my SM-N920T using Tapatalk
Reply With Quote
  #1066  
Old 06-22-2018, 9:57 AM
F&F FIREARMS F&F FIREARMS is offline
Vendor/Retailer
 
Join Date: Apr 2018
Posts: 94
iTrader: 0 / 0%
Default

I stripped all the X5s yesterday and I am blocking mags today. All x5 ordwr will ship today and tomorrow. Jigs should ship out tuesday to all that ordered a personal... I have an abundance of x5 kits and xcarry kits in stock right now. But it want be at the killer group price deal unfortunately. They are way to hard to get. Easiest way is to text me if you are interested. 7142932273
I also have p250 .22 caliber kits for $350. And tons of exchange kits. And dont forget we also have full glock build kits with oem parts, mags and case in g17,19,22,24,26 and 27... $650 with poly lower
Reply With Quote
  #1067  
Old 06-22-2018, 12:13 PM
myv myv is offline
Member
 
Join Date: Feb 2011
Posts: 195
iTrader: 12 / 100%
Default

Thanks for the jig shipping date!
Reply With Quote
  #1068  
Old 06-22-2018, 12:43 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Quote:
Originally Posted by hamster07 View Post
https://www.sigsauer.com/store/p320-...-9-40-357.html

Sent from my SM-N920T using Tapatalk
Yea I was hoping someone had it local to me so I can test fire this weekend

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1069  
Old 06-22-2018, 1:26 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

If anybody still has the ca x5 model with no magwell let me know I have any extra set

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1070  
Old 06-22-2018, 3:55 PM
docflash's Avatar
docflash docflash is offline
Member
 
Join Date: Jul 2010
Location: Southern California
Posts: 236
iTrader: 16 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Yea I was hoping someone had it local to me so I can test fire this weekend

Sent from my SM-N950U using Tapatalk
I might have one. I'll check. Where are you located?
__________________
Sig Sauer Certified Armorer, P-Series Pistols
Sig Sauer Certified Armorer, P320 Pistol
Reply With Quote
  #1071  
Old 06-22-2018, 5:05 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Quote:
Originally Posted by docflash View Post
I might have one. I'll check. Where are you located?
Ie corona

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1072  
Old 06-22-2018, 5:42 PM
docflash's Avatar
docflash docflash is offline
Member
 
Join Date: Jul 2010
Location: Southern California
Posts: 236
iTrader: 16 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Ie corona

Sent from my SM-N950U using Tapatalk
I have one. Part #1300891-R, Slide Catch Lever, 320

I'm in Chino Hills. Going out to dinner right now for my anniversary (38 years!!!) PM me and we can set something up.

Jeff
__________________
Sig Sauer Certified Armorer, P-Series Pistols
Sig Sauer Certified Armorer, P320 Pistol
Reply With Quote
  #1073  
Old 06-22-2018, 5:52 PM
BajaJames83's Avatar
BajaJames83 BajaJames83 is offline
Veteran Member
 
Join Date: Jun 2011
Location: North West SD county
Posts: 4,892
iTrader: 321 / 100%
Default

Quote:
Originally Posted by lamduh View Post
Anybody got a spare slide catch..... I broke mine trying to bend it

Sent from my SM-N950U using Tapatalk
question for you...
did everything work except the slide catch was a little too high to where it wouldnt work unless you bent it?

My first one turned out like that.
I think it was because of the top part of the JIG not being in a vice when i drilled the holes.

My 2nd one worked out perfect except its a little hard the get the sldie off the rear frame rails.
__________________
NRA Life Member
USMC 2001-2012

Never make yourself too available or useful...... Semper Fidelis

John Dickerson: What keeps you awake at night?
James Mattis: Nothing, I keep other people awake at night.

Reply With Quote
  #1074  
Old 06-22-2018, 5:55 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Quote:
Originally Posted by docflash View Post
I have one. Part #1300891-R, Slide Catch Lever, 320

I'm in Chino Hills. Going out to dinner right now for my anniversary (38 years!!!) PM me and we can set something up.

Jeff
Congrats pm coming

Sent from my SM-N950U using Tapatalk
Reply With Quote
  #1075  
Old 06-22-2018, 6:00 PM
lamduh's Avatar
lamduh lamduh is offline
Senior Member
 
Join Date: Dec 2011
Location: IE
Posts: 1,617
iTrader: 66 / 100%
Default

Quote:
Originally Posted by BajaJames83 View Post
question for you...
did everything work except the slide catch was a little too high to where it wouldnt work unless you bent it?

My first one turned out like that.
I think it was because of the top part of the JIG not being in a vice when i drilled the holes.

My 2nd one worked out perfect except its a little hard the get the sldie off the rear frame rails.
I think the holes are to low, I think it was the jig holes are like 1mm off or out of spec maybe

Everything else worked after fitting for the most part.

Sent from my SM-N950U using Tapatalk

Last edited by lamduh; 06-22-2018 at 6:02 PM..
Reply With Quote
  #1076  
Old 06-22-2018, 9:43 PM
deedzman deedzman is offline
Member
 
Join Date: Jan 2014
Location: Orange County
Posts: 271
iTrader: 20 / 100%
Default

So for those who have competed the build successfully... maybe someone can help me out or even is local or I’d be willing to meet somewhere in southern Cali for some tips. I had gone to the IE build but only had time to work on the insert.

But upon sliding the slide onto the frame with the insert installed, the safety lever stays up and blocks the slide from going all the way back. I have to put some force to get it to slide rather than a smooth slide on.

Then, when I cock the slide, the trigger is dead on the first pull. But the first pull while it was initially dead causes the second pull to make the striker go off. It’s as if I need to pull a dead trigger once every time to make the 2nd pull live... maybe I installed something wrong? Will try and go back and re do it but I did follow the video slowly to make sure.

Anyone else have an issue like this or know what it sounds like it could be?

Thanks
Reply With Quote
  #1077  
Old 06-22-2018, 9:51 PM
Ocbc Ocbc is offline
Member
 
Join Date: Dec 2012
Posts: 114
iTrader: 7 / 100%
Default

Quote:
Originally Posted by deedzman View Post
So for those who have competed the build successfully... maybe someone can help me out or even is local or Iíd be willing to meet somewhere in southern Cali for some tips. I had gone to the IE build but only had time to work on the insert.

But upon sliding the slide onto the frame with the insert installed, the safety lever stays up and blocks the slide from going all the way back. I have to put some force to get it to slide rather than a smooth slide on.

Then, when I cock the slide, the trigger is dead on the first pull. But the first pull while it was initially dead causes the second pull to make the striker go off. Itís as if I need to pull a dead trigger once every time to make the 2nd pull live... maybe I installed something wrong? Will try and go back and re do it but I did follow the video slowly to make sure.

Anyone else have an issue like this or know what it sounds like it could be?

Thanks
Where you located, Im in Yorba Linda. Could try to help you out. Make sure, as stated above, that after you put the slide on you bring it back and lock it back. This should allow the slide safety to release. Then release the slide and you are in business.

Mine was "tight" all around at first. I took it apart a couple times and also cycled everything numerous times. It loosens up after that.

I also want to remove the internals and polish things up a little better.
Reply With Quote
  #1078  
Old 06-22-2018, 9:54 PM
EvolvedRaven EvolvedRaven is offline
Member
 
Join Date: Apr 2008
Posts: 182
iTrader: 9 / 100%
Default

Quote:
Originally Posted by deedzman View Post
So for those who have competed the build successfully... maybe someone can help me out or even is local or Iíd be willing to meet somewhere in southern Cali for some tips. I had gone to the IE build but only had time to work on the insert.

But upon sliding the slide onto the frame with the insert installed, the safety lever stays up and blocks the slide from going all the way back. I have to put some force to get it to slide rather than a smooth slide on.

Then, when I cock the slide, the trigger is dead on the first pull. But the first pull while it was initially dead causes the second pull to make the striker go off. Itís as if I need to pull a dead trigger once every time to make the 2nd pull live... maybe I installed something wrong? Will try and go back and re do it but I did follow the video slowly to make sure.

Anyone else have an issue like this or know what it sounds like it could be?

Thanks
You mean disconnector? Have you been to Nubruns build website? At the very end, it tells you to make some room for the disconnector to drop. You have to remove enough metal for it to drop all the way down.
Reply With Quote
  #1079  
Old 06-22-2018, 9:55 PM
Ocbc Ocbc is offline
Member
 
Join Date: Dec 2012
Posts: 114
iTrader: 7 / 100%
Default

Quote:
Originally Posted by lamduh View Post
I think the holes are to low, I think it was the jig holes are like 1mm off or out of spec maybe

Everything else worked after fitting for the most part.

Sent from my SM-N950U using Tapatalk
I attended the saturday symposium in the IE.
I have noticed that the that after taking mine a part a couple times, pieces dont always drop into place correctly. Mine works good right now (have not test fired) but I want to polish some more.
Reply With Quote
  #1080  
Old 06-22-2018, 9:59 PM
F&F FIREARMS F&F FIREARMS is offline
Vendor/Retailer
 
Join Date: Apr 2018
Posts: 94
iTrader: 0 / 0%
Default

I have a few people coming over in the morning to pick up x series kits so if a tone needs help PM me... also that range report is awesome! If anyone can outshoot me at the range I will give them an x5 😎
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 11:36 PM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2018, Calguns.net an Incorporated Company All Rights Reserved.
Calguns.net and The Calguns Foundation have no affiliation and are in no way related to each other.
All opinions, statements and remarks made by Calguns.net on this web site and elsewhere are solely attributable to Calguns.net.