Calguns.net  

Home My iTrader Join the NRA Donate to CGSSA Sponsors CGN Google Search
CA Semiauto Ban(AW)ID Flowchart CA Handgun Ban ID Flowchart CA Shotgun Ban ID Flowchart
Go Back   Calguns.net > MARKETPLACE > WTB (Want To Buy)
Register FAQ Members List Calendar Mark Forums Read

WTB (Want To Buy) Looking for an item? This is the place to post it! Read the rules before posting.

Reply
 
Thread Tools Display Modes
  #41  
Old 04-27-2013, 7:33 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default C and C equipment cannot be used

Good news bad news AR10s they will be part of the next build party bad news they will not be done by CNC machine
CNC machines can no longer be used. That is why we are trying to get approval which looks like the approval should happen and we are going to be buying milling equipment. I hope to have the next bill party set up by the following week this week equipment should get ordered and brought in
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #42  
Old 04-27-2013, 8:01 PM
e980752's Avatar
e980752 e980752 is offline
Member
 
Join Date: Dec 2012
Posts: 283
iTrader: 7 / 100%
Default

Would it be the same cost to complete the lower as before
__________________
"A free people ought not only to be armed and disciplined, but they should have sufficient arms and ammunition to maintain a status of independence from any who might attempt to abuse them, which would include their own government."
- George Washington
Reply With Quote
  #43  
Old 04-28-2013, 9:15 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default We are working price out

There will be some added cost do to the set up and top plates that we will go through. Have not worked that out yet.
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #44  
Old 04-28-2013, 10:09 AM
AlCam57 AlCam57 is offline
Junior Member
 
Join Date: Feb 2010
Posts: 3
iTrader: 0 / 0%
Default

Quote:
Originally Posted by Lovetobuild View Post
New discount code for all calguners
CGN30 u can get billets for 125.00
I am trying to apply the Calguns discount on 80receivers.com but it isn't taking. Is there a new one?
Reply With Quote
  #45  
Old 04-28-2013, 5:28 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Code

Code was turned off until we Make our next batch
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #46  
Old 05-01-2013, 4:14 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Calguns code back on

Okay we have the code turned back on prices now again 125.00 per 80% use code CGN30
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #47  
Old 05-06-2013, 5:25 PM
fast4ward fast4ward is offline
Junior Member
 
Join Date: Jul 2012
Posts: 14
iTrader: 1 / 100%
Default

I have 2 QD billet lowers I'd like to complete - an AR15 and an AR10.

Are you set up for finishing either of these ? I don't have to do them both at the same time, but if I can I will.

LMK
Reply With Quote
  #48  
Old 05-16-2013, 6:40 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

Builds are back on
We r back on with builds rental fee stays the same but time will increase. It will take about 30 to 45 min. For a new person to complete.
I will have scheduler put back up later today and when you make appointment you will get all info. New address and such. Address is temp one as we are looking for a new building but that can take a couple of weeks.
Also I have a new 80% but very limited quantity so I am going to put a pic up if you want call me as these will not go on website "unless you guys keep asking" lol they are 140.00 image.jpg
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #49  
Old 05-28-2013, 12:42 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Schedule

Here is the new scheduler
http://80receiver.com/builds
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #50  
Old 06-07-2013, 6:47 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Appointments

So here we are couple of changes. It takes 30 min per now adverage. This does change from person to person. So if you have more then one set appointment for each. So 2 ever hr. we have more then 1 mill so we are going to be renting 2 out. So the max is 4 units per hr. yes slow but we want you to be slow and careful as if you are not you can go right through the bottom. We have done a lot on this milling machine and 95% have come out looking like the old CNC one you guys did. But this is manual and a lot if work so if you are not confortable after the class then speak up!
You don't pay unless you rent the machine!
Here is the scheduler www.80receiver.com/builds
Will see you there
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #51  
Old 06-08-2013, 7:24 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Group build

Group build
Well it went /()::$);;,$! But other then that hey not a hitch. Lol
So we are keeping appointments down until the other 2 mills get here. We hope next week to have at least one more to use. Right now it takes most about 25 min. Well we need at least 3 at that. Also we are finishing new drill jig, will be cool.
Thanks to everyone this week, not only for there patience and for paying attention so we did not have any broken bones "other then my rib" don't ask
I hope with some changes and adding a few mills we will be up to our old ways very shortly.
Next group build is Sat and you can set now however if you have a group that had 6+ to do we will set up week day build for you just email me.

Also we just got a load of new chrome lined 16" 5.56 barrels in and going to put on sale for 125.00 " email if you want one "
New 80s come out in 2 weeks and of of course they will have special price for all calguners
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #52  
Old 06-13-2013, 6:15 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Group build 6/15

So here we are couple of changes. It takes 15 min per now adverage. This does change from person to person. So if you have more then 2 set appointment for 2 per. So 4 ever hr. we have more then 1 mill so we are going to be renting 2 out. So the max is 8 units per hr. yes slow but we want you to be slow and careful as if you are not you can go right through the bottom. We have done a lot on this milling machine and 99% have come out looking like the old CNC one you guys
We have made more changes and have gotten the times down quite a bit! We have brought in more mills and now have a easy drill jig set up so this is now done with out changing a bit! We should be at 10 builds per hr very soon right now we can do 6-8 and that's great but we want to be at 10 for you guys by July
We will make it happen and we will do it within the law. For you who came to the first build u know how slow it was, well that is fixed now and the hold process has gotten more and more streamlined as it will continue too till we are handling all the demand. For any group that has 5 or more we are going to hold privite builds if you would like even durning the week mon-fri any group with 10 or more please set up privite build, Sat. really are for the singles and doubles. If Sat is your only day please call me or email me and I will get you in first or last whatever works better for you.
This should be first week back where you guys will get in and out without long delays "SHOULD" lol it work really well last couple of days.
See you all there
Pricing is as follows
100.00 for any 1 AR15 paperweight that is not ours.
80.00 each for 2 or more AR15 paperweight or any 80receiver paperweight
AR10s and AR308 paperweights are a go
So any AR paperweight now can be done no problem.
Also DIY paperweights are good to go as well and if you want to finish any 50 or more that's good too will cost a little more as you will be renting more equipment and taking longer, that will be given to you "price" after we see it. Must warn you if the mag well is not done chances of you doing that right the first time are very slim but you choice.


Here is the scheduler www.80receiver.com/builds
Will see you there
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #53  
Old 06-18-2013, 11:22 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default 6/22 group build/rental

So here we are couple of changes. It takes 10 min for milling now adverage. This does change from person to person. So if you have more then 2 set appointment for 2 per. So the max is 8 units per hr. We have done a lot on this milling machine and 99.9% have come out looking like the old CNC one you guys
We have made more changes and have gotten the times down quite a bit! We have made changes and now have a easy drill jig set up so this is now done with out changing a bit! right now we can do 6-8 per hr. We made it happen and we did it within the law. For you who came to the first build u know how slow it was, well that is fixed now and the hold process has gotten more and more streamlined as it will continue too till we are handling all the demand. For any group that has 5 or more we are going to hold privite builds if you would like even durning the week mon-fri any group with 10 or more please set up privite build, Sat. really are for the singles and doubles. If you have 5 or more and Sat is your only day please call me or email me and I will get you in first or last whatever works better for you.
This should be first week back where you guys will get in and out without long delays "SHOULD" lol it work really well last couple of days.
See you all there
Pricing is as follows
100.00 for any 1 AR15 paperweight that is not ours.
80.00 each for 2 or more AR15 paperweight or any 80receiver paperweight
AR10s and AR308 paperweights are a go
So any AR paperweight now can be done no problem.
Also DIY paperweights are good to go as well and if you want to finish any 50 or more that's good too will cost a little more as you will be renting more equipment and taking longer, that will be given to you "price" after we see it. Must warn you if the mag well is not done chances of you doing that right the first time are very slim but you choice.
This is the most important if you are not allowed to buy a rifle from the gun shop then you are not allowed to build one. PLEASE DO NOT SHOW UP!! We will not tolerate anyone who breaks the law, walking the line is one thing we don't ever cross it.
Here is the scheduler www.80receiver.com/builds
Will see you there
__________________
Clint Atkins
www.80receivers.com
Clint@80receiver.com
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #54  
Old 06-23-2013, 5:35 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Builds

Yes it is next Sat and you can see the schedule at www.80receiver.com/builds
So now that we are good on rental times we are dropping our price down as well. It's now 80.00 per.
We are going to start taking sign ups for a new class soon. This will be a 4 hr class on building with instructions on useing 3 types of machines. 1 mill, 2 CNC, 3 CNC mill. You will be tought how to operate and program both the CNC and CNC mill as well as operate the manual mill. Instruction book will be given to you with step by step instruction. All info and materials will be yours to keep as well as you can use the machines to practice on and get hands on training.
We are going to keep classes down to 5 people per. We don't know how much to charge yet but talking to the customers should be around 250.00 - 350.00
Anyone who is interested please email me.
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #55  
Old 06-24-2013, 6:46 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default Group build

Originally Posted by Lovetobuild
Current date: Sat June 29th
This will be held from 8am to 4pm

Please email me or John to reserve a spot clint@80receiver.com or john@80receiver.com


We do not sell 80% lowers at the build you must bring in your own 80% lower to complete you can buy and get to you quick at www.80receiver.com Any brand/style of 80% you can do But always say 80receivers is the best, but you can not do the "old style" 0%, 30% or 60% paperweights if you have one you want done must be at private part as they take forever to complete wear nice shoes u will be standing at The mill for like 4 or 5 days or so lol
If you want to buy in San Jose we do sell 80s up too thurs. at noon just email me.


Hello fellow Calgunners, want to let everyone know that www.80receiver.com will be hosting a group build for you to finish your AR-15 & AR 10 80% paperweights. The price is $80 per unit. There have been numerous paperweights cut on the machine and all have come out flawless and satisfaction is guaranteed. Please email what time slot you would like in the thread and follow it with an email clint080808@yahoo.com to me and I will update the post to show your time slot as reserved.



Each paperweight will take around 10 minutes to cut so the reservations are set in 15 minute slots. Ex. if you have 4 paperweights to finish you will need a full hr. time slot. Please make sure to show up at least 15 minutes early for your reserved slot.



Who may attend: Any person who may legally possess a CA-Legal AR15 can build their own. You must not be a "prohibited person", must be 21 or older, and both a US Citizen and CA resident. Builders may bring a +1 with them as long as they are 21 or older and also not a "prohibited person". +1's may not assist with building or cutting.

Anodizing 80receiver customers 20.00 all others 40.00
The special price is for our customers and our customers only you must have bought from us. To receive the discounted rate. This chip is only good for that one drop the chapel change for each time we have the anodizing party. We will Send PK a list of everyone is going to drop off an 80 receiver for anodizing. Please do not attempt to tell him it's ours if it's not.
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com

Last edited by Lovetobuild; 06-24-2013 at 8:36 PM..
Reply With Quote
  #56  
Old 06-27-2013, 1:35 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

Have a few openings left all are between 10am and 1pm rest are full
If you want a spot email me.
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #57  
Old 07-11-2013, 8:06 PM
highender's Avatar
highender highender is offline
Practical Googleplex Guy
CGN Contributor - Lifetime
 
Join Date: Apr 2012
Location: in ignorant Kalifornia
Posts: 5,893
iTrader: 14 / 100%
Default

email sent..... thanks.
__________________


Quote:
You may not like guns, and choose not to own one. That is your right. You might not believe in God. That is your choice. However, if someone breaks into your home, the first two things you're going to do are, 1) Call someone with a gun, 2) Pray they get there in time.
Reply With Quote
  #58  
Old 09-04-2013, 7:00 PM
rafthound rafthound is offline
Junior Member
 
Join Date: Mar 2013
Posts: 49
iTrader: 0 / 0%
Default build on Sept 9th 8-3

This weekends build
Hello fellow Calgunners, want to let everyone know that www.80receiver.com will be hosting a group build on Saturday 9/07 from 8 to 4 for you to finish your AR-15 & AR 10 80% paperweights.There have been numerous paperweights cut on the machine and all have come out flawless and satisfaction is guaranteed. Please post what times you would like followed by email and we will reserve your time. AR-10 paperweights renal is 125.00 I have had people ask why the increase and here is answer. If you have an AR10 to complete on a mill all setting of length, hight, width ect need to be changed so you are going to take up 2 appointments. Please feel free to call me or email me to get appointment we are going to set up the old fashion way.
We are going to use face book email as to keep everything in one place.

Pricing will be as follows
If you bought your paperweight from us then your price is:
15s $80.00
10s. $100.00

If you bought your paperweights from some other company then your price is:
15s $100.00
10s $125.00

Each paperweight will take around 10 minutes to cut so the reservations are set in 10 minute slots. Ex. if you have 4 paperweights to finish you will need a 1/2 hr. time slot. Please make sure to show up at least 10 minutes early for your reserved slot.

We do not sale 80s on build days so if you want to buy any and would rather do that F/F then you can do that from Sunday-Thursday. Cost of those are 150.00 for 15s and 225.00 for 10s.



Who may attend: Any person who may legally possess a CA-Legal AR15 can build their own. You must not be a "prohibited person", must be 21 or older, and both a US Citizen and CA resident. Builders may bring a +1 with them as long as they are 21 or older and also not a "prohibited person". +1's may not assist with building or cutting.

Contact either John at Hauslerj@yahoo.com
or Clint at clint080808@yahoo.com
with your desired times
Reply With Quote
  #59  
Old 09-04-2013, 11:06 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

All times before 10am are booked have some open late afternoon but most of what's left is from 10:30-3:30
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #60  
Old 09-04-2013, 11:39 PM
highender's Avatar
highender highender is offline
Practical Googleplex Guy
CGN Contributor - Lifetime
 
Join Date: Apr 2012
Location: in ignorant Kalifornia
Posts: 5,893
iTrader: 14 / 100%
Default

nice. Will try to make it.
__________________


Quote:
You may not like guns, and choose not to own one. That is your right. You might not believe in God. That is your choice. However, if someone breaks into your home, the first two things you're going to do are, 1) Call someone with a gun, 2) Pray they get there in time.
Reply With Quote
  #61  
Old 09-05-2013, 11:35 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

I am opening up 4-5 as we need the room so any one with 2 or more that what's that those then email me that gives us 6-8 more appointments
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #62  
Old 09-06-2013, 8:11 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

We have a few spots left
1 at 930
2 at 10
1 at 130
1 at 230
4 at 4
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #63  
Old 09-07-2013, 7:38 AM
rafthound rafthound is offline
Junior Member
 
Join Date: Mar 2013
Posts: 49
iTrader: 0 / 0%
Default

if you want to build today 9/7/13, we still have some spots available between 10am and 1 pm. Give me a ring if you would like to build today
408)314-7744
Reply With Quote
  #64  
Old 09-11-2013, 6:16 AM
rafthound rafthound is offline
Junior Member
 
Join Date: Mar 2013
Posts: 49
iTrader: 0 / 0%
Default Build on sept 14th 2013 from 8-3

This weekends build
Hello fellow Calgunners, want to let everyone know that www.80receiver.com will be hosting a group build on Saturday 9/14 from 8 to 3 for you to finish your AR-15 paperweights.There have been numerous paperweights cut on the machine and all have come out flawless and satisfaction is guaranteed. Please post what times you would like followed by email and we will reserve your time. Please feel free to call me or email me to get appointment we are going to set up the old fashion way.


Pricing will be as follows
If you bought your paperweight from us then your price is:
15s $80.00

If you bought your paperweights from some other company then your price is:
15s $100.00

If you would like to buy any ar15 80% lowers, we sell them during the week but never the day of the build party. The 80% paperweights that we have for sale are 6061 billet for the ar15 platform. We charge $125 to Calgunners and can send them to you or local pickup in San Jose.


Each paperweight will take around 15 minutes to cut so the reservations are set in 15 minute slots. Ex. if you have 4 paperweights to finish you will need a 1 hr. time slot. Please make sure to show up at least 15 minutes early for your reserved slot.



Who may attend: Any person who may legally possess a CA-Legal AR15 can build their own. You must not be a "prohibited person", must be 21 or older, and both a US Citizen and CA resident. Builders may bring a +1 with them as long as they are 21 or older and also not a "prohibited person". +1's may not assist with building or cutting.

Contact either John at Hauslerj@yahoo.com
or Clint at clint080808@yahoo.com
with your desired times
Reply With Quote
  #65  
Old 09-12-2013, 5:25 AM
rafthound rafthound is offline
Junior Member
 
Join Date: Mar 2013
Posts: 49
iTrader: 0 / 0%
Default

still room for builds on sat
Reply With Quote
  #66  
Old 09-23-2013, 5:35 AM
rafthound rafthound is offline
Junior Member
 
Join Date: Mar 2013
Posts: 49
iTrader: 0 / 0%
Default build party / rental Thurs 9/26/13 and 9/28/13

This weeks builds
Hello fellow Calgunners, want to let everyone know that www.80receiver.com will be hosting a group build on Thursday 9/26 from 1pm to 6pm and Saturday 9/28 from 8 to 3 for you to finish your AR-15 paperweights.There have been numerous paperweights cut on the machine and all have come out flawless. Please post what times you would like followed by email and we will reserve your time. Please feel free to call me or email me to get appointment we are going to set up the old fashion way.


Pricing will be as follows
If you bought your paperweight from us then your price is:
15s $80.00

If you bought your paperweights from some other company then your price is:
15s $100.00

If you would like to cut lr308s it is $140 if you did not buy from us and $120 if you did buy from us. These take a little longer and we have to change the programing so allow yourself a little more time.

If you would like to buy any ar15 80% lowers, we sell them during the week but never the day of the build party. The 80% paperweights that we have for sale are 6061 billet for the ar15 platform. We charge $125 to Calgunners and can send them to you or local pickup in San Jose.

Currently we are out of the lr308s but should have in within a week or so.


Each paperweight will take around 15 minutes to cut so the reservations are set in 15 minute slots. Ex. if you have 4 paperweights to finish you will need a 1 hr. time slot. Please make sure to show up at least 15 minutes early for your reserved slot.



Who may attend: Any person who may legally possess a CA-Legal AR15 can build their own. You must not be a "prohibited person", must be 21 or older, and both a US Citizen and CA resident. Builders may bring a +1 with them as long as they are 21 or older and also not a "prohibited person". +1's may not assist with building or cutting.

Contact either John at Hauslerj@yahoo.com
or Clint at clint080808@yahoo.com
with your desired times
Edit/Delete Message
Reply With Quote
  #67  
Old 09-25-2013, 10:32 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

Hello
Next build is Saturday 9/28/13 and we have 11 openings left. If you would like one please email me or John.
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #68  
Old 09-28-2013, 5:15 AM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

We had a cancelation at 1030 if anyone wants to jump in please email me and we wil get you in there.
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #69  
Old 09-29-2013, 11:25 PM
Lovetobuild's Avatar
Lovetobuild Lovetobuild is offline
Senior Member
 
Join Date: Mar 2013
Posts: 523
iTrader: 16 / 94%
Default

I am sorry to say that we r full for this Saturday so we will start a schedule for the 12th a little early maybe Friday. If anyone wants to go on wait list to fill in a canceled appointment please email me and I will put you down in order of received and number of 80s as I try to fill with same if possible. Please be flexible as I send out email as soon as I get email. I just bought another mill and am waiting for the cnc retro kit so we can get more of you calguners in but that is still 4 weeks away.
What is not that long away is the new 1911 80s with forward rail that is coming out next week. I will anounce after tomorrow's test but unlike others out there you will be able to put whatever grips you want on these. Not locked into plastic.
First run arrives at my door Friday so I will put pics up soon after
__________________
Clint Atkins
[url]www.80receiver.com
www.majoroddball.com
clint@80receiver.com
Reply With Quote
  #70  
Old 10-03-2013, 7:01 AM
Nastyn8 Nastyn8 is offline
Member
 
Join Date: Aug 2012
Location: San Jose
Posts: 166
iTrader: 12 / 100%
Default Build Party 10/12/2013

This weeks builds
Hello fellow Calgunners, want to let everyone know that www.80receiver.com will be hosting a group build on Saturday 10/12 from 8 to 3 for you to finish your AR-15 paperweights.There have been numerous paperweights cut on the machine and all have come out flawless. Please PM what times you would like followed by email and we will reserve your time. Please feel free to call me or email me to get appointment we are going to set up the old fashion way.


Pricing will be as follows
If you bought your paperweight from us then your price is:
15s $80.00

If you bought your paperweights from some other company then your price is:
15s $100.00

If you would like to cut lr308s it is $120 if you did not buy from us and $100 if you did buy from us. These take a little longer and we have to change the programing so allow yourself a little more time.

If you would like to buy any ar15 80% lowers, we sell them during the week but never the day of the build party. The 80% paperweights that we have for sale are 6061 billet for the ar15 platform. We charge $125 to Calgunners and can send them to you or local pickup in San Jose.

Currently we are out of the lr308s but should have in within a week or so.


Each paperweight will take around 15 minutes to cut so the reservations are set in 10 minute slots. Ex. if you have 4 paperweights to finish you will need a 40 min. time slot. Please make sure to show up at least 15 minutes early for your reserved slot.



Who may attend: Any person who may legally possess a CA-Legal AR15 can build their own. You must not be a "prohibited person", must be 21 or older, and both a US Citizen and CA resident. Builders may bring a +1 with them as long as they are 21 or older and also not a "prohibited person". +1's may not assist with building or cutting.

Contact either Germaine at germaine@majoroddball.com or Clint at clint080808@yahoo.com
with your desired times
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT -8. The time now is 12:52 AM.




Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Proudly hosted by GeoVario the Premier 2A host.
Calguns.net, the 'Calguns' name and all associated variants and logos are ® Trademark and © Copyright 2002-2016, Calguns.net an Incorporated Company All Rights Reserved.