What did you reload today?

[rsrocket1]

200 40 S&W, 200 38 Special and 100 45 ACP yesterday. But that was only half of what I shot this week. The good thing is I never have to change the setting on the powder measure. 5.0 grains of Unique and I'm good to go!

[csburtch]

6.8 SPC 115gn Nosler bthp. Very nice groups.

[Colt562]

Originally Posted by rsrocket1

200 40 S&W, 200 38 Special and 100 45 ACP yesterday. But that was only half of what I shot this week. The good thing is I never have to change the setting on the powder measure. 5.0 grains of Unique and I'm good to go!

hahaha gotta love that.

Might go out and do 400 223 if I have the time.

[DelDanko]

180 45 acp 200g over 5g of Bullseye. shoots great. also im on a single stage press so its much harder lol

[Whiterabbit]

Originally Posted by Whiterabbit

460 S&W

Originally Posted by NotEnufGarage

Break 'em down for me!!

220 grain cast for 45 acp
290 grain Barnes TMZ boat tail, 2000 fps.
425 grain Ranch Dog, 460-425
540 grain BPCR Hoch Nose Pour
590 grain Led Zeppelin, Old West Molds.
740 grain NEI 458-630. Because 500 S&W should not have the record for the heaviest bullet available in a factory mold.

We hold that record now.

...I'm not sure the 740 has enough meplat.

[M27]

Originally Posted by DelDanko

180 45 acp 200g over 5g of Bullseye. shoots great. also im on a single stage press so its much harder lol

I feel you on the single stage, I have never known anything but a single stage. 500 rounds can take a while but I still like my single stage.

What 200gn bullet are you using? I am still trying to find a 200gn I like.

[russt]

250rds of 44mag
240gr lswc
6.7gr titegroup
Cci lp primers
RP brass

[DelDanko]

Originally Posted by M27

I feel you on the single stage, I have never known anything but a single stage. 500 rounds can take a while but I still like my single stage.

What 200gn bullet are you using? I am still trying to find a 200gn I like.

i use Rainer copper plated. got them at cabellas for like 60-70$ per 500 so i figured it try them.i notice i have to flare a little more with them compared for my other loads. but the 200g rainer over 5g bullseye shots really soft and i never had one single problem cycling the weapon. (kimber custom II )

[NiteQwill]

500 rounds of 45 ACP
5.2 gr W231
WLP
1.230 OAL
200 gr Xtreme

[knucklehead0202]

over the weekend i did 50rds of 6.5x52 carcano with a 129gr SP and also 50rds of 7.35 carcano running a 128gr. sure it doesn't sound like a lot but i do all this in a cramped closet while being harassed by my 4yr-old twins and measuring every charge. i first fill all the cases with powder and just stick an upside-down bullet in each so i can get all the powder dropped and shut off the lyman so i can do seating without upsetting it. anyone who own a digital powder meaure/scale knows what i'm talking about. they're twitchy.

[gemoose23]

Sizing .308 Winchester last night.. 1st stuck case on 10 years of metallic reloading...

Now I know why I should've had one of those stuck case tools on hand, after years of wondering "who gets cases stuck."

[uhlan1]

Did some 115gr 9mm this morning.

[Colt562]

1 round of 223. Yes one.

[Whiterabbit]

wow, the rationing at the gun shops is pretty brutal these days, isnt it.

[Colt562]

Originally Posted by Whiterabbit

wow, the rationing at the gun shops is pretty brutal these days, isnt it.

if this was in reply to me, I just happened to walk by the press and saw a lonely primer sitting there, Reached down grabbed a piece of ready brass and a bullet, loaded it walked away.

[Leon75x55]

400 .223 w/55gr FMJ
150 .223 w/62gr FMJ
Wife is home today so need to spend "quality" time with her, so Monday will be pistols.

[milw50717]

100 x .308 ready for tomorrow's trip to the range.

[Kurgan]

1000 9mm 115gr FMJ
4.7gr HP-38
CCI 500 SPP
Mostly Winchester brass and the rest Federal

[M27]

I didn't load them yet but I cast 300 lyman 525gn 12 gauge slugs.

[rockdogz]

.40
5.6 grains of Unique under 180 grain RNFP Xtreme using CCI 500 primers.
500 rounds... cost of components $61.16

[Full Clip]

Originally Posted by M27

I didn't load them yet but I cast 300 lyman 525gn 12 gauge slugs.[/IMG]

Damn, that's a pile of WIN!

[350skylark]

100 rounds of 45 acp.. getting ready to head back for another 100 rounds.

[jdmstuff]

750 rounds of 9mm and 500 rounds of .45. Running low on primers now.

[knucklehead0202]

also did 94rds(don't know how we ended up that way) or .308 for my brother's fal, 150gr sp over 44gr BL-C(2). 50rds .303brit 180gr over 45gr of the same. 7.7 jap, 150gr sp over i don't remember how many of RL-17, somewhere around 46 though, and some 8x56r, 208gr fmjbt and some BL-C(2). been a reloading devil lately, on my (mostly) cheap equipment. all lee dies except the .308 because they were backordered. the hornady new dimension .308 dies seem to work just fine, kinda different from the lee i'm used to , but they work. next up is 6.5 jap and 7x57 mauser. haven't decided on loads yet but i'll figure it out. gonna run real light and fast on the jap. i have a bunch of real light 6.5 bullets and i'm gonna smoke 'em out there even with the small-capacity jap. it'll handle it no problem, should get some good muzzle flash outta the 38 carbine too!

[elx144]

I did 100 of these before my trip to the range:
9mm 115gr fmj
3.7gr Solo 1000
CCI #500 SPP

All went bang and only one failed to cycle.

[AdidasCJ]

124g RN - 4.4g & 147 JHP - 4.4g

[xrMike]

Originally Posted by M27

They look a lot like ammo for a pellet gun!

[elx144]

expanded and primed 400 9mm
loaded 200 of the 400

115 gr FMJ
3.7gr Solo 1000
CCI #500
1.12 COL

[noplay6978]

test batch of 100 rnds of 62 gr federal lap and 20gr. of reloader 7 on range brass and win primers. Alliant and Lee have no load data for reloader 7 and boolits over 55 gr. Sierra had some older data for 63 gr boolits and RL7.

[uhlan1]

400 rounds 9mm 115 plated

[M27]

Originally Posted by xrMike

They look a lot like ammo for a pellet gun!

sorry for the cell pic, but here is one of the slugs next to a .177 air gun pellet

[pdq_wizzard]

Originally Posted by xrMike

They look a lot like ammo for a pellet gun!

Originally Posted by M27

sorry for the cell pic, but here is one of the slugs next to a .177 air gun pellet

Not so much now

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

[One78Shovel]

Just pettering along with some 223 work.

-178S

[xrMike]

Originally Posted by pdq_wizzard

Not so much now

No kidding, .

[glock7]

100 rounds of .223 50 rounds @ 25.1gr and 50 rounds @ 25.8 load development with 4895.

[uhlan1]

made more 115gr plated 9mm last night until 2am started again at 9am and I'm still going. i find something that works well for me, I don't make hundreds, I make thousands. The rote actions are almost therapeutic.
My daughter loads pickup tubes for me to keep it crankin'.
We'll go shoot some later today. Shooting your own ammo sure makes it even more fulfilling.

[G38xOC]

100 of 40cal
7.2 of 800x
180gr of Hyshck
CCI SP
1.115 AOL
once fired

[Nacinator]

1800 rounds of 5.5x45 55 grn fmjwc hornady with 23.5 grains of 2230 and my Dillon 650XL

[AdidasCJ]

First Test Load on my new Lee Load Master. 55g, 23g Hodgdon Varget on Federal 200 primers OAL 2.25

[uhlan1]

Several hundred 9mm then I went out and shot every last one.
Yay!!!
Gives me a sense of freedom and independence I really can't describe.