***Just some words of friendly advice (and some helpful information as well) from someone who knows the facts - just like other(s) have said above, but you don't seem to understand them***
Here goes my attempt to help you: Like it was explained to you above, a BCM stripped lower simply
doesn't exist, as
no FFL in the United States sells them (including Bravo themselves). The
only company that sells BCM Lowers (COMPLETE LOWERS, mind you) is G&R Tactical :
http://www.gandrtactical.com/cgi-bin...on&key=LWR-BCM . Now, one has to practically check their website or call every other day because these lowers are gone as soon as they come in because of severe demand for those that are wanting to build and complete a 100% BCM rifle. Barring an Act of God,
this is the only way you are going to ever get yourself what you are asking for. Reason? Who in their right mind is going to go through all the trouble of waiting/calling to get one of these only to
strip it down to sell it to someone on Calguns? And herein lies yet
another problem - say, a miracle Act of God happens and someone actually
does this for you.
Have you ever stripped a lower? There
will (more likely than not) be blemishes and marks/small dings & scratches from the stripping process on this lower now that it has been stripped by an end-user. You want a "no blem" part, if I am correct, right? As far as the "
unfired" part of your post, here are a few things to think about - "firing" an AR has zero effect on the lower receiver and causes no stress whatsoever on this part. The lower is just there to hold the magazine / FCG / and buttstock. Also, if a private party were to actually sell you one of these -
you would never know whether or not it had been "fired" or not, as firing the complete rifle makes no lower different in any way/shape/form from a brand new one off the assembly line! And the "firing" part is a moot point anyway because BCM test fires all their rifles (yes, before the lowers are shipped to G&R) before they leave the factory.
Anyway, this was my attempt at showing you that you are wasting your time asking for something that (again)
doesn't exist. This was also my way of giving you help on getting a BCM lower (albeit complete, hence more $$$ nonetheless). Start checking (daily if you want this lower bad enough) with G&R until they get a batch of them in. But be
quick on the draw (or phone, I guess would be more appropriate), as most of these BCM lowers are either spoken for before they arrive, OR there are hundreds of others that are checking/calling every other day. I really hope this helps you and that you do finally get your lower.
But it ain't gonna be a stripped and "unfired" one from anyone here. G&R is your salvation, brother. Embrace it!
p.s. - in the event that some
extreme gouging lowlife sees this thread and you are still bumping it after we have tried to help/educate you on this matter, this piss-ant will more than likely get his hands on a complete lower from G&R at some point (or maybe already has one in his/her safe); strip it carefully; tell you that it is "unfired";
and then mark up the price 2-3-4x (more than the complete lower itself is worth) and then you will have been had if you go ahead and pay that much for a $120 part. If you keep on bumping this thread to the top after the sound advice and information you have been given, someone
will eventually see an opportunity to take major advantage of you (plus make some serious ca$h!). Again, I'm just trying to help. If I were you, I'd just delete the whole thread and get started on the link I provided for you above.
Good luck to you. If the above doesn't (or can't) convince you of the reality of the situation,
then nothing will. (Just some words to the wise)
Peace