Calguns.net

Calguns.net (http://www.calguns.net/calgunforum/index.php)
-   AlphaOps-REMOVED- (http://www.calguns.net/calgunforum/forumdisplay.php?f=274)
-   -   The All New Daniel Defense 5.56 Salt Bath Nitride 16" Mid-Length Lightweight Barrels (http://www.calguns.net/calgunforum/showthread.php?t=646818)

AlphaOps 11-21-2012 6:02 AM

The All New Daniel Defense 5.56 Salt Bath Nitride 16" Mid-Length Lightweight Barrels
 
An AlphaOps Exclusive! - See the Exclusive Offer for Calguns Members Here!
We're excited to announce the arrival of the All New Daniel Defense 5.56 Salt Bath Nitride 16" Mid-Length Lightweight Barrels with 1/7 twist!

http://www.alphaops.com/images/A_DD_Main.jpg

Yup! Finally a lightweight, mid-length, cold hammer forged 5.56 salt bath nitrited (SBN) barrel! Through our search for the best multipurpose AR, we have found that the barrel can make or break ones relationship with a rifle. A rifle needs a barrel that is accurate, reliable, durable, and requires minimal attention to perform as expected. Our search for such a barrel resulted with us partnering with Daniel Defense, a leading manufacturer in the industry, to bring you a Cold Hammer Forged and Salt Bath Nitrided 16 inch barrel that is lightweight with a mid-length gas system. This combination yields a durable, lightweight, quick pointing rifle that is low maintenance and will accompany you for a lifetime through the toughest of days and the most memorable adventures.

Click Here To read about our methodology behind the development of these barrels

Detailed Pics Below
http://www.alphaops.com/images/dd_fsb.jpg
All Front Sight Base (FSB) versions are meant to be free floated. No hand guard plates are included.

http://www.alphaops.com/images/dd_lopro.jpg
The low profile gas block is tapper pinned and NOT a set screw or clap-on!

http://www.alphaops.com/images/A_DD_Rollmark.jpg
All products manufactured by Daniel Defense come with their 100% lifetime satisfaction guarantee against defects in materials and workmanship!

http://www.alphaops.com/images/A_DD_Chamber.jpg
The receiver extensions are ready for M4 feed Ramp upper receivers.

http://www.alphaops.com/images/A_DD_Crown.jpg
As always, MP inspected with 1/7 twist and a 1/2x28 thread pitch.

Configuration and Purchase Options - See the Exclusive Offer for Calguns Members Here!

Note: All versions (FSB & Low Profile) include a mid-length gas tube and roll pin!
All BCG Combos come with Daniel Defense Complete Bolt Carrier Group
that is MP inspected and FA rated!

Daniel Defense Melonite CHF Mid length 16"
5.56 Lightweight Barrel - w/FSB + Gas Tube

http://www.alphaops.com/images/dd_fsb.png

Daniel Defense Melonite 16" 5.56 Mid length
CHF Lightweight Barrel - w/FSB + GT + BCG

http://www.alphaops.com/images/dd_fsb_bcg.png

Daniel Defense Melonite CHF Mid length 16"
5.56 Lightweight Barrel - w/LPGB + Gas Tube

http://www.alphaops.com/images/dd_lopro.png


Daniel Defense Melonite 16" 5.56 Mid length
CHF Lightweight Barrel - w/LPGB + GT + BCG

http://www.alphaops.com/images/dd_lopro_bcg.png

JDPhx501 11-29-2012 11:20 AM

Just received it in the mail along with the MUR1.

Thanks again AlphaOps for the great products, great prices, great service!

AlphaOps 11-29-2012 12:11 PM

Thanks for the kind words. Enjoy :D

peter95 12-21-2012 11:24 AM

Received my Barrel, great condition and packaging. Thank you!!!!!
Feedback will be left!

peter95 12-21-2012 11:25 AM

I really wanted the BCG package and you didn't have it at the time. Is there a way I could purchase the BCG separately?

peter95 12-21-2012 11:25 AM

I really wanted the BCG package and you didn't have it at the time. Is there a way I could purchase the BCG separately?

AlphaOps 12-21-2012 11:27 AM

Peter,
Have a Happy Holiday! Post a pic of your rig when done!

peter95 12-21-2012 2:25 PM

Quote:

Originally Posted by AlphaOps (Post 9978965)
Peter,
Have a Happy Holiday! Post a pic of your rig when done!

Oh I will!

I just emailed Tom btw. Thanks for the help!

gesundheit 12-22-2012 9:04 AM

Does the low profile gas block comes pinned from Daniel Defence or did you guys pin it inhouse?

http://www.alphaops.com/images/dd_lopro.jpg

peter95 12-25-2012 12:26 AM

Quote:

Originally Posted by gesundheit (Post 9986722)
Does the low profile gas block comes pinned from Daniel Defence or did you guys pin it inhouse?

http://www.alphaops.com/images/dd_lopro.jpg

When I received their barrel, it was not pinned. You will not have a problem removing it and getting it pinned during the build.

AlphaOps 12-25-2012 9:54 AM

Quote:

Originally Posted by gesundheit (Post 9986722)
Does the low profile gas block comes pinned from Daniel Defence or did you guys pin it inhouse?

Quote:

Originally Posted by peter95 (Post 10010642)
When I received their barrel, it was not pinned. You will not have a problem removing it and getting it pinned during the build.

Hello All,
The barrels come drilled and pinned from Daniel Defense on both models. However, the pins are just lightly punched into place for shipping. Proper pin setting will need to be done AFTER you have installed the barrel on your upper receiver and your choice of rail system installed.

Happy Holidays!

gesundheit 12-28-2012 9:05 AM

Thank you Peter and AlphaOps.

GunnerB 01-15-2013 4:12 PM

Got mine today, nice package...to bad you're OOS. Great Product.

AlphaOps 01-15-2013 4:52 PM

Quote:

Originally Posted by GunnerB (Post 10219769)
Got mine today, nice package...to bad you're OOS. Great Product.

Thanks for the kind words from you and all those who purchased. Yeah, they are some nice barrels! We'll keep you guys in the loop when we get more back in stock.

Thanks!

hoju32 01-25-2013 8:14 AM

Do you guys have an estimate on when you'll have more barrels in stock?

AlphaOps 01-25-2013 9:04 AM

We'll keep you guys posted as soon as we get an ETA inbound.
Thanks!

peter95 02-01-2013 8:17 AM

One of my finished AR's.

I will post pic of the other one once I get my Rail in.... =)

Enjoy and thanks Alphaops!

http://farm9.staticflickr.com/8363/8...55666d5b_z.jpg
http://farm9.staticflickr.com/8056/8...ce58684e_z.jpg

Icypu 02-08-2013 8:39 AM

Please let me know when back in stock.

AlphaOps 02-08-2013 11:18 AM

Will do!

ILVH8RS 06-13-2013 6:40 PM

Any word on new barrels?

AlphaOps 06-18-2013 9:45 AM

Quality barrel steel is hard to come by these days. We'll keep you guys posted. Thanks for asking!

cj3waker 06-29-2013 2:00 PM

Any chance we can get a list or something going for those of us that want these barrels so we can be notified when you get them in? Ive also been bugging daniel defense about them.

lll commit right here to buying a 14.5" midlength .625 with an F marked FSB if you guys can get them, that would be my dream config

AlphaOps 07-01-2013 12:31 PM

This would be interesting to see what configs you all would like. Chime in as we work the other end with Daniel Defense.

kevlar711yo 08-16-2013 6:51 PM

Any updates on these barrel? I would like to see a 16"inch Mid-length/Government profile barrel with 1/7 twist.

gregshin 08-22-2013 9:08 PM

Id like a barrel combo as well

eternal24k 11-24-2013 9:32 AM

Any chance these will happen again? Would love a 16" with FSB...


All times are GMT -8. The time now is 7:31 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2016, vBulletin Solutions, Inc.