Calguns.net

Calguns.net (https://www.calguns.net/calgunforum/index.php)
-   Commercial Sales (https://www.calguns.net/calgunforum/forumdisplay.php?f=105)
-   -   NEW JL Billet M-Lok 308 Rails, 10.9 Oz w/Barrel Nut (https://www.calguns.net/calgunforum/showthread.php?t=996544)

JL_Billet 10-22-2014 8:18 PM

NEW JL Billet M-Lok 308 Rails, 10.9 Oz w/Barrel Nut
 
JL Billet 308 15" Angle Cut Free Float M-Lok Hand Guard

The continuous top rail allows you to mount iron sights, optics and any other accessories without additional rail sections. The M-Lok system allows users to customize the handguard with rail sections and direct mount accessories. The handguard is constructed of 6061-T6 aircraft aluminum and finished with a Mil-Spec type III hard coat black anodizing.

The MLA has a precision bore to fit the proprietary barrel nut which removes any unwanted play and ensures an exact fit!! Installation requires a 1-5/16" crows foot wrench (not included) for the barrel nut; standard AR-10 barrel nut wrenches will not work with this handguard system. These rails are some of the lightest you will find anywhere! The 15" weighs in at only 10.9 oz. including the barrel nut. Machining is second to none!!

*DPMS Low Profile Rail Height*
*High Profile Available NOW*

Technical Information:

Material: Hard Coat Anodized Aluminum Handguard, 7075-T6 Barrel Nut
Stainless Steel Key Seat
Precision Bore
1913 Picatinny Continuous Top Rail
Accepts M-Lok Rail Sections & Accessories (2 sections included)
Requires 1-5/16" Crowfoot Wrench (not included)
Weight is 10.9oz. with barrel nut


PM me for dealer inquiries. 12.8" and 10.6" also available


http://cdn2.bigcommerce.com/n-biq04i...0.1280.png?c=2
http://cdn2.bigcommerce.com/n-biq04i...0.1280.png?c=2
http://cdn2.bigcommerce.com/n-biq04i...0.1280.png?c=2
http://cdn2.bigcommerce.com/n-biq04i...0.1280.png?c=2
http://cdn2.bigcommerce.com/n-biq04i...g?t=1420604024
http://cdn2.bigcommerce.com/n-biq04i...g?t=1420610453


http://www.jlbillet.com/jl-billet-30...ok-hand-guard/

JL_Billet 10-23-2014 9:03 PM

We are running a special on these through calguns. $240 shipped use coupon code "308mlok" for the deal. Fit and finish is second to none!!

JL_Billet 10-27-2014 10:43 AM

Bump

JL_Billet 10-31-2014 7:05 AM

DPMS high profile rails coming soon.

JL_Billet 11-09-2014 7:19 AM

bump

UberPatriot 11-09-2014 7:24 AM

Will these work with a Smith and Wesson M&P 10?

JL_Billet 11-10-2014 9:01 AM

Yes they should line up. I pretty sure that the M&P upper has 1 7/16-16 threads and the rail height is the same as the DPMS low profile.

sean5063 11-10-2014 10:57 AM

Any plans for colored versions?

JL_Billet 11-10-2014 12:47 PM

Quote:

Originally Posted by sean5063 (Post 15233649)
Any plans for colored versions?

We do offer them raw for guys that want to cerakote them. We will be offering complete build kits for 308's soon as well.

JL_Billet 11-12-2014 8:10 PM

Thanks for the orders, we only have one left in stock but we're running more by the end of the week.

TZL 11-13-2014 4:48 PM

Whats the measurement difference between a high and lower DPMS upper? I have a 2012/3 upper, is that probably a low?

JL_Billet 11-14-2014 7:04 PM

The difference is about 1/16" I would have to see a pic of the upper to tell what it is.

JL_Billet 11-19-2014 8:21 PM

We now have high profile rails available and Armalite barrel nuts as well. PM me for more details.

JL_Billet 11-25-2014 7:52 PM

BLACK FRIDAY SALE: 10% site wide plus free shipping.

Code: BLKFRI10

Until the end of the month

JL_Billet 12-08-2014 1:10 PM

10.6" rails are now available.

JL_Billet 12-17-2014 9:22 PM

12.8" will be available this week.

JL_Billet 12-23-2014 6:00 PM

Armalite rails now available in 15", 12.8", and 10.6"
14" coming soon.

JL_Billet 01-02-2015 9:12 PM

We now have 15" straight front rails available.

jafount 01-02-2015 9:56 PM

Beautiful! Will it work with the Mega Arms MA10 upper receiver? Also, on your website under Modular Billet Stock, the rifle photo shows a beautiful fluted buffer tube. Is this your design? If not, where can I get it?

JL_Billet 01-04-2015 7:20 PM

Quote:

Originally Posted by jafount (Post 15556049)
Beautiful! Will it work with the Mega Arms MA10 upper receiver? Also, on your website under Modular Billet Stock, the rifle photo shows a beautiful fluted buffer tube. Is this your design? If not, where can I get it?

It will work with the MA10. It will be high profile but you need to verify the thread pitch on the barrel nut. If it's 18 TPI it's Armalite and if it's 16 TPI it's DPMS.

PWS buffer tube.

Dean58 01-06-2015 11:08 AM

like what I'm seeing - is it best to set an appt to come by the shop and check them out?

JL_Billet 01-06-2015 8:33 PM

Quote:

Originally Posted by Dean58 (Post 15577271)
like what I'm seeing - is it best to set an appt to come by the shop and check them out?

We're usually there all day but always busy. Early afternoon is best.

Dean58 01-08-2015 5:42 AM

Love the work you are doing - thanks for your time at the shop!

Talk to you soon

rt7 01-10-2015 4:02 AM

Coupon code expired.

JL_Billet 01-10-2015 11:21 AM

We extended the code until the end of the month.

Quote:

Originally Posted by rt7 (Post 15601385)
Coupon code expired.


JL_Billet 01-13-2015 10:37 AM

Straight Cut 15" now available.

http://cdn2.bigcommerce.com/n-biq04i...0.1280.png?c=2

JL_Billet 02-04-2015 8:52 PM

bump

JL_Billet 02-06-2015 10:27 PM

http://cdn2.bigcommerce.com/n-biq04i...g?t=1423193371

JL_Billet 03-02-2015 7:09 PM

New 14" equilateral triangle 308 in high, low, and armalite.

http://cdn2.bigcommerce.com/n-biq04i...0.1280.png?c=2

Yerman 03-02-2015 8:12 PM

Any plans to incorporate KeyMod slots?

JL_Billet 03-03-2015 2:55 PM

We were running Keymod on our 556 rails but they don't sell as well as the M-Lok so we dropped Keymod and are doing M-Lok only. Sorry.

Quote:

Originally Posted by Yerman (Post 15908388)
Any plans to incorporate KeyMod slots?


Blkhunter01 03-06-2015 2:14 AM

Now all I/we need are your AR15 uppers to be completed lol!!

jre 03-06-2015 10:09 AM

Quote:

Originally Posted by Blkhunter01 (Post 15926087)
Now all I/we need are your AR15 uppers to be completed lol!!

And a coupon code and some free shipping:43:

Loose screw 03-08-2015 12:41 PM

Any discounts at this time on the 15'' angle cut handguard?

jaynick 03-10-2015 9:36 AM

or the 15" straight cut? :D

JL_Billet 03-10-2015 10:44 AM

All 308 handguards ship free. Take5 will get you 5% off your order also. 556 uppers on the way haha, seriously though they are coming.

Loose screw 03-14-2015 4:59 PM

I just ordered mine. Thanks!

v6pwr 03-24-2015 9:56 AM

Quote:

Originally Posted by JL_Billet (Post 15948664)
All handguards ship free. Take5 will get you 5% off your order also. 556 uppers on the way haha, seriously though they are coming.

All rails? I don't see free shipping for 556 rails, only 308 rails... can you please take a look and see if you can possibly fix it? Thanks!!

Matel Onely 04-14-2015 8:42 AM

I saw an instragram photo of a muzzle brake you all were making that has a similar angle to your fore ends. Any word on that?

Here's the link:
https://instagram.com/p/yqxqlelU-c/

k1dude 04-14-2015 9:21 AM

It appears your proprietary barrel nut doesn't require timing, is that correct?

If it does require timing, do your handguards come with timing shims?

The reason I ask is because for some reason all the LR-308 builds I've been doing seem to have timing issues requiring over-torque or refacing.


All times are GMT -8. The time now is 3:53 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.